removed, (cleared)

This forum is dedicated to those hobbyists with the 3-in-1 metalworking machines. Mill-Drill-Lathes. Tips, techniques, modification and use of these machines is topical.

Moderator: Harold_V

Post Reply
JakeHalstrom
Posts: 4
Joined: Wed Apr 28, 2010 8:31 am
Contact:

Briggs

Post by JakeHalstrom »

ID number: 3876 - Phila 44 2700 rpm 250 watts 115 volts. Direct current power. I believe it was used in WWII to power field operations for the US Army. The Briggs and Stratton Model I engine starts and runs very well for an engine that is 65 years old. It appears to have the original olive drab green paint from the factory. It has a very nice "twist-on" oil dipstick and gas tank that has the shut off valve on top.

[links removed due to spyware scan warnings]
Torch
Posts: 1684
Joined: Wed Mar 17, 2010 7:58 am
Location: Muskoka

Re: Briggs

Post by Torch »

I'm not sure what your post is about. Are you offering this for sale, or just showing it off? Also, you might want to post this in a more suitable forum like General Discussions or Junk Drawer. the 3-in-1 Metalworking Machines refers to combination mill-drill-lathe equipment which has a rather narrow following.
Post Reply