V10 question - wiper felts ?

This forum is dedicated to those hobbyists with the 3-in-1 metalworking machines. Mill-Drill-Lathes. Tips, techniques, modification and use of these machines is topical.

Moderator: Harold_V

Post Reply
PeteH
Posts: 1065
Joined: Mon Jun 11, 2007 10:49 pm
Location: Tidewater Virginia, USA

V10 question - wiper felts ?

Post by PeteH »

How thick should the felt be for the way-wipers on the V10 ?

Thanks...
Pete in NJ
Top
Justted
Posts: 9
Joined: Thu Mar 24, 2011 2:37 pm
Location: San Carlos, California

Re: V10 question - wiper felts ?

Post by Justted »

I measured my wiper felts and I would think that new they were about 3/32 thick. Hope this helps.

Ted
Top
Post Reply

Return to “3-in-1 Metalworking Machines”