6 inch 3 jaw chuck for a 1220 XL

This forum is dedicated to those hobbyists with the 3-in-1 metalworking machines. Mill-Drill-Lathes. Tips, techniques, modification and use of these machines is topical.

Moderator: Harold_V

Post Reply
j860112
Posts: 2
Joined: Tue Jul 24, 2012 9:35 pm

6 inch 3 jaw chuck for a 1220 XL

Post by j860112 » Thu Jul 26, 2012 6:41 pm

Need a 6 inch 3 jaw chuck for a 1220 XL smithy dose not have any in stock an wont get any till Sept any one know where I might find one mounts with three M8 X 1.25 bolts

Torch
Posts: 1548
Joined: Wed Mar 17, 2010 7:58 am
Location: Muskoka

Re: 6 inch 3 jaw chuck for a 1220 XL

Post by Torch » Thu Jul 26, 2012 7:49 pm

If you can't find one, could you use a 4 jaw with an adapter plate?

j860112
Posts: 2
Joined: Tue Jul 24, 2012 9:35 pm

Re: 6 inch 3 jaw chuck for a 1220 XL

Post by j860112 » Sat Jul 28, 2012 8:29 am

I have a 8 inch 4 jaw I was hoping to find a 6 inch 3 jaw for its lighter weight and not having to center it each time I use it for quick work and simple jobs

Post Reply