Mercer starter valve o ring size?
Moderators: gwrdriver, Harold_V
-
- Posts: 6
- Joined: Wed Jan 10, 2018 8:26 pm
Mercer starter valve o ring size?
Anyone know the size of the Mercer starting valve O ring?
Thanks
Thanks
- Trainman4602
- Posts: 3482
- Joined: Sat Oct 16, 2004 9:26 pm
- Location: New Jersey
Re: Mercer starter valve o ring size?
Did you think to ask me? I got your PM and I'll address it as soon as I return from Cabin Fever Expo on Monday
ALLWAYS OPERATING MY TRAIN IN A SAFE MANNER USING AUTOMATIC AIR BRAKES
-
- Posts: 6
- Joined: Wed Jan 10, 2018 8:26 pm
Re: Mercer starter valve o ring size?
I text you over three weeks ago and then PM ed you. Neither were answered. How am I supposed to know your at an event. You posted on Tuesday about your safeties and starters. I PM you Wednesday.
-
- Posts: 6
- Joined: Wed Jan 10, 2018 8:26 pm
Re: Mercer starter valve o ring size?
I'm not mad about it Dave I'm just looking to get some pieces. Hope you enjoy steaming this weekend.
Thank you
Scott
Thank you
Scott
- Trainman4602
- Posts: 3482
- Joined: Sat Oct 16, 2004 9:26 pm
- Location: New Jersey
Re: Mercer starter valve o ring size?
Hi Scott
I have been busy with pattern work and so on so I will get to your order on Monday. BTW I don't have the wrench I have the other stuff I'll give you the McMaster Carr part number you can order the O rings By the hundred Cheaper then they would be from me. I have the nuts and end pieces
I have been busy with pattern work and so on so I will get to your order on Monday. BTW I don't have the wrench I have the other stuff I'll give you the McMaster Carr part number you can order the O rings By the hundred Cheaper then they would be from me. I have the nuts and end pieces
ALLWAYS OPERATING MY TRAIN IN A SAFE MANNER USING AUTOMATIC AIR BRAKES
-
- Posts: 6
- Joined: Wed Jan 10, 2018 8:26 pm
Re: Mercer starter valve o ring size?
Well I never heard back from Dave after phone calls and texts, pm's etc. sooooo does anyone have the McMaster Carr prt # for the mercer starter valves ?
Thanks
Thanks
- Bill Shields
- Posts: 10594
- Joined: Fri Dec 21, 2007 4:57 am
- Location: 39.367, -75.765
- Contact:
Re: Mercer starter valve o ring size?
With dimensions the O-Ring size can be found....but if you have the dimensions, you can get it yourself (obvious...)
Dave will get back with you...patience is a virtue.
Dave will get back with you...patience is a virtue.
Too many things going on to bother listing them.
-
- Posts: 6
- Joined: Wed Jan 10, 2018 8:26 pm
Re: Mercer starter valve o ring size?
Apparently will have take that route. Was just hoping for an easy step in just getting the part number.
Thank you.
Thank you.
- Trainman4602
- Posts: 3482
- Joined: Sat Oct 16, 2004 9:26 pm
- Location: New Jersey
Re: Mercer starter valve o ring size?
Listen I posted on you PM LOOK at your PM PLEASE
ALLWAYS OPERATING MY TRAIN IN A SAFE MANNER USING AUTOMATIC AIR BRAKES
- Trainman4602
- Posts: 3482
- Joined: Sat Oct 16, 2004 9:26 pm
- Location: New Jersey
Re: Mercer starter valve o ring size?
I answered this a week Ago PLEASE LOOK AT YOUR PM
ALLWAYS OPERATING MY TRAIN IN A SAFE MANNER USING AUTOMATIC AIR BRAKES
- Trainman4602
- Posts: 3482
- Joined: Sat Oct 16, 2004 9:26 pm
- Location: New Jersey
Re: Mercer starter valve o ring size?
HERE IT IS IN CASE YOU DON"T KNOW HOW TO CHECK THEM
Trainman4602 wrote:Tue Jan 16, 2018 9:39 pm Hi Scott
For one set of union nut and feral will be $15.00 per set.
Shipping will be $7.15
I do not have wenches
"O" ring number McMaster Carr 9464K12
ALLWAYS OPERATING MY TRAIN IN A SAFE MANNER USING AUTOMATIC AIR BRAKES
Re: Mercer starter valve o ring size?
Scott
Now that you know the oring size, i.e. 007 you may be able to find it at a NAPA store or local hydraulic shop. Just make sure it is Viton.
John B.
Now that you know the oring size, i.e. 007 you may be able to find it at a NAPA store or local hydraulic shop. Just make sure it is Viton.
John B.