Machine Tools for Sale
Moderators: gwrdriver, Harold_V
Machine Tools for Sale
The daughter and son in law of my friend, Larry Kombrink have been slowly settling his estate. They are in the process of getting his shop ready for sale. The tools are located in Georgetown Colorado. If you are interested please send me a PM and I will send you the email to contact them. They do not answer phone calls from strangers. Needless to say it is pick up only
His lathe was always in the back bedroom of the house and now it sets in the living room. This being said to say the lathe has always been kept indoors, not out in the cold garage.
It is a Lux-Matter Lathe Model 1340, with a D1-4 Spindle nose, 1 9/16", Morris taper #5, Spindle speed 85-2000RPM, Metric and SAE threads, Gap Swing 20", Jashico Machine Manufacture CO, LTD
It comes with a Magnatec VFD to be run on single phase.
Extra tools
Asking $4,200.00
His lathe was always in the back bedroom of the house and now it sets in the living room. This being said to say the lathe has always been kept indoors, not out in the cold garage.
It is a Lux-Matter Lathe Model 1340, with a D1-4 Spindle nose, 1 9/16", Morris taper #5, Spindle speed 85-2000RPM, Metric and SAE threads, Gap Swing 20", Jashico Machine Manufacture CO, LTD
It comes with a Magnatec VFD to be run on single phase.
Extra tools
Asking $4,200.00
Charlie Pipes
Mid-South Live Steamers
Current Projects:
Scratch Built 3 3/4 scale 0-4-4 Forney
Little Engines American
20 Ton Shay (Castings and Plans Purchased for future)
Mid-South Live Steamers
Current Projects:
Scratch Built 3 3/4 scale 0-4-4 Forney
Little Engines American
20 Ton Shay (Castings and Plans Purchased for future)
Re: Machine Tools for Sale
As above, these would be for local pick up only. Please send me a PM if you are interested and I will forward it to the sellers.
Jet Vertical Band saw Model VBS12,Serial#120280, Capacity 160x320 MM, Stock #41490, Welder 1.2KVA, Motor 1/2 AMP, $575.00
Rong Fu 7" Band saw Model #RF712, Serial #571704, Manufacture 199507,Caicity 7 RD, 7"x12" Rect. Blade 3/4"x0.032x93", Speed 85-130-180-235 FPM 60 HZ, 70-110-150-195 FPM 50HZ, $325.00
Jet Power Hack saw Model #Jet-170, Serial #9590E 1995/G, Prewired 115V, Motor 1/2 HP, 1 Phase, $210.00
Jet Vertical Band saw Model VBS12,Serial#120280, Capacity 160x320 MM, Stock #41490, Welder 1.2KVA, Motor 1/2 AMP, $575.00
Rong Fu 7" Band saw Model #RF712, Serial #571704, Manufacture 199507,Caicity 7 RD, 7"x12" Rect. Blade 3/4"x0.032x93", Speed 85-130-180-235 FPM 60 HZ, 70-110-150-195 FPM 50HZ, $325.00
Jet Power Hack saw Model #Jet-170, Serial #9590E 1995/G, Prewired 115V, Motor 1/2 HP, 1 Phase, $210.00
Charlie Pipes
Mid-South Live Steamers
Current Projects:
Scratch Built 3 3/4 scale 0-4-4 Forney
Little Engines American
20 Ton Shay (Castings and Plans Purchased for future)
Mid-South Live Steamers
Current Projects:
Scratch Built 3 3/4 scale 0-4-4 Forney
Little Engines American
20 Ton Shay (Castings and Plans Purchased for future)
Re: Machine Tools for Sale
The lathe also has a four jaw chuck, face plate and the gear set available (not pictured).
I went ahead and listed these on Discover Live Steam for the family also.
I went ahead and listed these on Discover Live Steam for the family also.
Charlie Pipes
Mid-South Live Steamers
Current Projects:
Scratch Built 3 3/4 scale 0-4-4 Forney
Little Engines American
20 Ton Shay (Castings and Plans Purchased for future)
Mid-South Live Steamers
Current Projects:
Scratch Built 3 3/4 scale 0-4-4 Forney
Little Engines American
20 Ton Shay (Castings and Plans Purchased for future)
Re: Machine Tools for Sale
As the owner has not received any takers she is getting ready to place these on Craig's List and E Bay. She is considering a lower price. If you are interested in making an offer send me a PM and I will give you their e mail address
Charlie Pipes
Mid-South Live Steamers
Current Projects:
Scratch Built 3 3/4 scale 0-4-4 Forney
Little Engines American
20 Ton Shay (Castings and Plans Purchased for future)
Mid-South Live Steamers
Current Projects:
Scratch Built 3 3/4 scale 0-4-4 Forney
Little Engines American
20 Ton Shay (Castings and Plans Purchased for future)
Re: Machine Tools for Sale
Sold
Charlie Pipes
Mid-South Live Steamers
Current Projects:
Scratch Built 3 3/4 scale 0-4-4 Forney
Little Engines American
20 Ton Shay (Castings and Plans Purchased for future)
Mid-South Live Steamers
Current Projects:
Scratch Built 3 3/4 scale 0-4-4 Forney
Little Engines American
20 Ton Shay (Castings and Plans Purchased for future)
Re: Machine Tools for Sale
Great. Thanks for taking this on.
Steve
Steve
Re: Machine Tools for Sale
Not sure who bought them. Would have been me, except for the distance and the fact I have spent all my toy allowance for the next couple of years
Charlie Pipes
Mid-South Live Steamers
Current Projects:
Scratch Built 3 3/4 scale 0-4-4 Forney
Little Engines American
20 Ton Shay (Castings and Plans Purchased for future)
Mid-South Live Steamers
Current Projects:
Scratch Built 3 3/4 scale 0-4-4 Forney
Little Engines American
20 Ton Shay (Castings and Plans Purchased for future)
Re: Machine Tools for Sale
All of the machines have been sold and are being picked up on 7/15.
Lonnie
Lonnie
Re: Machine Tools for Sale
congratulations
Charlie Pipes
Mid-South Live Steamers
Current Projects:
Scratch Built 3 3/4 scale 0-4-4 Forney
Little Engines American
20 Ton Shay (Castings and Plans Purchased for future)
Mid-South Live Steamers
Current Projects:
Scratch Built 3 3/4 scale 0-4-4 Forney
Little Engines American
20 Ton Shay (Castings and Plans Purchased for future)