2 1/2" Weir Type Feed Water Pump Castings & Print ****SOLD****
Moderators: gwrdriver, Harold_V
-
- Posts: 806
- Joined: Wed Jul 23, 2008 10:29 pm
- Location: Brentwood, CA.
2 1/2" Weir Type Feed Water Pump Castings & Print ****SOLD****
Consigning this pump Marketed by Wato Locomotive Works .Plans were done in metric but someone converted all measurements into good old English ?? I Hate Metric !!!! . The only castings that I don't see are the shuttle Block and the reversing block castings in bronze.I believe they both can both be made from brass or bronze . The rest of the materials used were off the shelf items. The pump is about 10" in height and 4" in width.This would be a great winter project . I will ship in a medium flat rate priority box . Price on this is 160.00 .SHIPPING INC.
-
- Posts: 806
- Joined: Wed Jul 23, 2008 10:29 pm
- Location: Brentwood, CA.