2 1/2" Weir Type Feed Water Pump Castings & Print

For the Buying/Selling/Trading of items of interest to those of us in the Live Steam Hobby.

Moderators: Harold_V, WJH, gwrdriver

Post Reply
Posts: 647
Joined: Wed Jul 23, 2008 10:29 pm
Location: Brentwood, CA.

2 1/2" Weir Type Feed Water Pump Castings & Print

Post by Postwarbob » Sat Aug 27, 2016 11:16 am

Consigning this pump Marketed by Wato Locomotive Works .Plans were done in metric but someone converted all measurements into good old English ?? I Hate Metric !!!! . The only castings that I don't see are the shuttle Block and the reversing block castings in bronze.I believe they both can both be made from brass or bronze . The rest of the materials used were off the shelf items. The pump is about 10" in height and 4" in width.This would be a great winter project . I will ship in a medium flat rate priority box . Price on this is 160.00 .SHIPPING INC.

Post Reply