10" South Bend Lathe ****SOLD****

For the Buying/Selling/Trading of items of interest to those of us in the Live Steam Hobby.

Moderators: gwrdriver, Harold_V

Post Reply
Larry Green
Posts: 2
Joined: Mon Oct 16, 2017 12:06 pm

10" South Bend Lathe ****SOLD****

Post by Larry Green »

10" South Bend Lathe for sale. 6" 3 & 4 jaw chucks, DRO, Aloris AXA toolpost and blocks, 5C collets, face- & dog plates, usual other tooling. Newer 1PH/ 110 motor. Original paint and no rust. Asking $1900. Located in Middlebury Vermont 05753
For full info email: llgreen@gmavt.net
User avatar
Steggy
Posts: 1976
Joined: Tue Jun 28, 2011 9:19 pm
Location: JB Pritzker’s Hellhole
Contact:

Re: 10" South Bend Lathe

Post by Steggy »

Larry Green wrote:10" South Bend Lathe for sale. 6" 3 & 4 jaw chucks, DRO, Aloris AXA toolpost and blocks, 5C collets, face- & dog plates, usual other tooling. Newer 1PH/ 110 motor. Original paint and no rust. Asking $1900. Located in Middlebury Vermont 05753
For full info email: llgreen@gmavt.net
Any photos you can post?
———————————————————————————————————————————————————————
Music isn’t at all difficult.  All you gotta do is play the right notes at the right time!  :D
User avatar
Bill Shields
Posts: 10460
Joined: Fri Dec 21, 2007 4:57 am
Location: 39.367, -75.765
Contact:

Re: 10" South Bend Lathe

Post by Bill Shields »

since you say 5C collets...assume it is a 10 heavy??
Too many things going on to bother listing them.
User avatar
makinsmoke
Posts: 2260
Joined: Thu Jul 10, 2003 12:56 pm
Location: Texas Hill Country

Re: 10" South Bend Lathe

Post by makinsmoke »

Is there any other kind of 10" Southbend?


(Snicker)
BClemens
Posts: 475
Joined: Sat Oct 08, 2016 10:04 pm
Location: Gloucester, VA (Sassafras)

Re: 10" South Bend Lathe

Post by BClemens »

Yes, the ones already scrapped and melted. Hopefully in this country but that's doubtful.


(another Snicker)
wewilliams
Posts: 81
Joined: Mon Jul 11, 2005 10:44 am
Contact:

Re: 10" South Bend Lathe

Post by wewilliams »

The 10R used 2A collets - but I am just pointing this out to be a pain.
User avatar
Fender
Posts: 3084
Joined: Wed May 02, 2007 8:33 pm
Location: Chattanooga TN

Re: 10" South Bend Lathe

Post by Fender »

makinsmoke wrote:Is there any other kind of 10" Southbend?


(Snicker)
Look here:
http://www.lathes.co.uk/southbend/page8.html
http://www.lathes.co.uk/southbend/page4.html
Dan Watson
Chattanooga, TN
SteveM
Posts: 7763
Joined: Mon Jun 27, 2005 6:18 pm
Location: Wisconsin

Re: 10" South Bend Lathe

Post by SteveM »

Larry Green wrote:10" South Bend Lathe for sale. 6" 3 & 4 jaw chucks, DRO, Aloris AXA toolpost and blocks, 5C collets, face- & dog plates, usual other tooling. Newer 1PH/ 110 motor. Original paint and no rust. Asking $1900. Located in Middlebury Vermont 05753
For full info email: llgreen@gmavt.net
You can post the pictures here.

In fact, you can post all of the information here.

Steve
Larry Green
Posts: 2
Joined: Mon Oct 16, 2017 12:06 pm

Re: 10" South Bend Lathe

Post by Larry Green »

Machine sold--thanks for looking.
Post Reply