Mercer starter valve o ring size?

Bizzles2.5rgs · Post by **Bizzles2.5rgs** » Thu Jan 11, 2018 7:53 pm

Anyone know the size of the Mercer starting valve O ring?

Thanks

Trainman4602 · Post by **Trainman4602** » Thu Jan 11, 2018 9:03 pm

Did you think to ask me? I got your PM and I'll address it as soon as I return from Cabin Fever Expo on Monday

Bizzles2.5rgs · Post by **Bizzles2.5rgs** » Fri Jan 12, 2018 6:54 am

I text you over three weeks ago and then PM ed you. Neither were answered. How am I supposed to know your at an event. You posted on Tuesday about your safeties and starters. I PM you Wednesday.

Bizzles2.5rgs · Post by **Bizzles2.5rgs** » Fri Jan 12, 2018 7:01 am

I'm not mad about it Dave I'm just looking to get some pieces. Hope you enjoy steaming this weekend.
Thank you
Scott

Trainman4602 · Post by **Trainman4602** » Fri Jan 12, 2018 8:55 am

Hi Scott
I have been busy with pattern work and so on so I will get to your order on Monday. BTW I don't have the wrench I have the other stuff I'll give you the McMaster Carr part number you can order the O rings By the hundred Cheaper then they would be from me. I have the nuts and end pieces

Bizzles2.5rgs · Post by **Bizzles2.5rgs** » Fri Jan 19, 2018 7:06 pm

Well I never heard back from Dave after phone calls and texts, pm's etc. sooooo does anyone have the McMaster Carr prt # for the mercer starter valves ?
Thanks

Bill Shields · Post by **Bill Shields** » Fri Jan 19, 2018 9:24 pm

With dimensions the O-Ring size can be found....but if you have the dimensions, you can get it yourself (obvious...)

Dave will get back with you...patience is a virtue.

Bizzles2.5rgs · Post by **Bizzles2.5rgs** » Sat Jan 20, 2018 10:41 am

Apparently will have take that route. Was just hoping for an easy step in just getting the part number.
Thank you.

Trainman4602 · Post by **Trainman4602** » Sat Jan 20, 2018 3:38 pm

Listen I posted on you PM LOOK at your PM PLEASE

Trainman4602 · Post by **Trainman4602** » Sat Jan 20, 2018 3:39 pm

I answered this a week Ago PLEASE LOOK AT YOUR PM

Trainman4602 · Post by **Trainman4602** » Sat Jan 20, 2018 3:41 pm

HERE IT IS IN CASE YOU DON"T KNOW HOW TO CHECK THEM

Trainman4602 wrote:Tue Jan 16, 2018 9:39 pm Hi Scott
For one set of union nut and feral will be $15.00 per set.

Shipping will be $7.15

I do not have wenches

"O" ring number McMaster Carr 9464K12

FLSTEAM · Post by **FLSTEAM** » Sat Jan 20, 2018 4:54 pm

Scott

Now that you know the oring size, i.e. 007 you may be able to find it at a NAPA store or local hydraulic shop. Just make sure it is Viton.

John B.

The Home Machinist!

Mercer starter valve o ring size?

Mercer starter valve o ring size?

Re: Mercer starter valve o ring size?

Re: Mercer starter valve o ring size?

Re: Mercer starter valve o ring size?

Re: Mercer starter valve o ring size?

Re: Mercer starter valve o ring size?

Re: Mercer starter valve o ring size?

Re: Mercer starter valve o ring size?

Re: Mercer starter valve o ring size?

Re: Mercer starter valve o ring size?

Re: Mercer starter valve o ring size?

Re: Mercer starter valve o ring size?