Show of Interest - Walschaerts Links - 1" Scale

For the Buying/Selling/Trading of items of interest to those of us in the Live Steam Hobby.

Moderators: gwrdriver, Harold_V

User avatar
rwmorris
Posts: 828
Joined: Wed Jan 14, 2004 9:03 am
Location: Healdsburg, CA. USA
Contact:

Re: Show of Interest - Walschaerts Links - 1" Scale

Post by rwmorris »

AnthonyDuarte wrote:Could use a rotary table, sure. But if Wire EDM is available the accuracy and surface finish are hard to beat. Not to mention it cuts hardened steel like butter. And while it’s cutting you can go eat a sandwich or something.
Mmmmmmm.... Sandwich....
User avatar
SteveR
Posts: 372
Joined: Thu Jun 01, 2006 4:17 pm
Location: Los Angeles

Re: Show of Interest - Walschaerts Links - 1" Scale

Post by SteveR »

Hi Mike,
To answer your question, I might take a set or two or even three depending on the price.
thanks,
SteveR
12x36 Enco Lathe, 9x42 Bridgeport, SMAW, O/A, Miller MIG w/gas, plasma
Not enough measuring tools...
1.5" Allen Models Consolidation on air.
1" FEF in progress
1" & 3/4" LE Projects
Measure twice, cut once, wait - it was supposed to be brass! :)
Post Reply