3/4" scale H.J. Coventry K4 castings available from Friends Models

For the Buying/Selling/Trading of items of interest to those of us in the Live Steam Hobby.

Moderators: Harold_V, WJH, gwrdriver

Post Reply
JohnK
Posts: 202
Joined: Mon Aug 15, 2005 11:13 am
Location: Beverly-by-the-Boston & Maine, MA
Contact:

3/4" scale H.J. Coventry K4 castings available from Friends Models

Post by JohnK » Fri Jul 20, 2018 9:48 pm

Group,

The 3/4" scale K4 by H.J. Coventry is now back on the Friends website.

The cylinder section was just completed and is now available. Below are the first Coventry K4 cylinders to be cast in decades.

COV K4_cylinders.jpg

The steam chest clearances, as well as the exhaust passages, are cored into the cylinder. Ribs cast onto on the side of each casting facilitate setup in your machine(s).

For more information or to purchase, please see http://www.friendsmodels.com/productsfo ... cific.html

As a reminder, the 3/4" scale D30 "USRA" Switcher, and the P7 "President Washington", both by Mr. Coventry, are also available. Also the 3/4" scale New York Central "Yankee Shop Hudson", by Laverne Langworthy. For simpler engines, the Friends Models "Dinky" 0-4-0, and "Angus", a 4-4-2 by Charlie Purinton, are also available. Please see www.friendsmodels.com and scroll down, for all designs.

Thank you,
-John

Post Reply