The Brass 1/8" scale model of the Westinghouse 10-20 retainer valve are now available. These were located close to the brake wheel on freight cars. Inlet sized for 3/32" tube or wire. Nonfunctional. The picture is on a 1" square.
https://www.shapeways.com/product/B5Q29 ... d=70098006
Brass 1/8" Scale Retainer Valve
Moderators: gwrdriver, Harold_V
-
- Posts: 1598
- Joined: Sun Jan 05, 2003 8:47 am
- Location: Florida, on the Lake Wales Ridge
Brass 1/8" Scale Retainer Valve
He who dies with the most unfinished projects: Should of put more time into their hobby.
Re: Brass 1/8" Scale Retainer Valve
Very well done with the brass version of the retainer valve.
This may encourage me to develop the wasp exclusion device which was very popular out west where any small diameter hole was a prime residence for certain varieties of wasps.
This may encourage me to develop the wasp exclusion device which was very popular out west where any small diameter hole was a prime residence for certain varieties of wasps.
-
- Posts: 1598
- Joined: Sun Jan 05, 2003 8:47 am
- Location: Florida, on the Lake Wales Ridge
Re: Brass 1/8" Scale Retainer Valve
Thanks you
Tim
He who dies with the most unfinished projects: Should of put more time into their hobby.