Hello friends,
I have a short run of the intermediate injectors in stock.
Quick overview of the specs:
- Delivery rate 3.25 pints per minute (60oz)
- 1/4” tubing on all connections
- 30psi to 160+ psi
- Lifting / Restarting
- 5/16”-40 overflow
They are $300 each
https://www.eccentricengineer.com/injec ... e-injector
I currently have only 5 Standard Injectors in stock, and the Small Scales will be restocked later this week (around 20 or so).
When inventory runs out, they will not be restocked anytime soon. I’m planning on turning my full attention to finishing the 1921 starter valves, Large EE Injectors, 1918A injectors, 2.5” Monitors, and the small scale safety valves (in that order). I would like to release all these products this year.
If you think you’ll need any of the EE injectors this year, I don’t recommend waiting too long!
Anthony
Intermediate Injectors in stock
Moderators: gwrdriver, Harold_V
- AnthonyDuarte
- Posts: 492
- Joined: Tue Jan 19, 2010 10:46 am
- Location: Orange, CA
- Contact:
- AnthonyDuarte
- Posts: 492
- Joined: Tue Jan 19, 2010 10:46 am
- Location: Orange, CA
- Contact:
Re: Intermediate Injectors in stock
Also,
I get a lot of compliments on the quality of these castings. Part of the reason they are so nice is that they’re not castings! All of the EE line injectors are machined from solid aluminum bronze. This gives me full control over quality and supply.
I have TWO injectors that showcase the “raw” machined surface finish. They have not been bead blasted.
I made 5 with this surface finish and there are only 2 left.
If you are interested, contact me privately through chaski. These will not be for sale through my website.
I get a lot of compliments on the quality of these castings. Part of the reason they are so nice is that they’re not castings! All of the EE line injectors are machined from solid aluminum bronze. This gives me full control over quality and supply.
I have TWO injectors that showcase the “raw” machined surface finish. They have not been bead blasted.
I made 5 with this surface finish and there are only 2 left.
If you are interested, contact me privately through chaski. These will not be for sale through my website.
Re: Intermediate Injectors in stock
I am impressed!AnthonyDuarte wrote: ↑Tue Jan 22, 2019 11:38 amAll of the EE line injectors are machined from solid aluminum bronze.
Steve
Re: Intermediate Injectors in stock
Anthony,
Will spare parts also be made available for the intermediate injectors?
Fred
Will spare parts also be made available for the intermediate injectors?
Fred
- AnthonyDuarte
- Posts: 492
- Joined: Tue Jan 19, 2010 10:46 am
- Location: Orange, CA
- Contact:
Re: Intermediate Injectors in stock
Hi Fred,
Spare parts will be available for the intermediate injectors.
Anthony
Spare parts will be available for the intermediate injectors.
Anthony
Re: Intermediate Injectors in stock
Thank you, order placed just now.