1.5" scale Pyle National type K2 generator ****SOLD****

For the Buying/Selling/Trading of items of interest to those of us in the Live Steam Hobby.

Moderators: Harold_V, WJH, gwrdriver

Post Reply
NZsteamer
Posts: 13
Joined: Wed Jun 10, 2020 9:38 pm
Location: New Zealand

1.5" scale Pyle National type K2 generator ****SOLD****

Post by NZsteamer » Wed Jun 10, 2020 10:16 pm

I have a working Pyle National Type K2 generator that I would like to sell. I normally supply casting sets to modelers around the world via eBay but I decided to jump in and make a working generator. I have done this once before and that went to a gentleman in Australia. My main reason for making the working generator is because the foundry I use to make these castings has recently decided to drastically increase their prices so the castings on their own have become a little expensive for what people are happy to pay.
I have had this generator under load and with 75psi air it was happily driving a 12v 5w automotive bulb and still producing around 13v. It produced nearly 15v with higher pressure so would benefit from some electronic voltage regulation.
I'm looking for $2000 for this unit including shipping worldwide.
Please PM me for enquiries about this unit or for my casting sets.
Chris A.
Attachments
20200605_143537.jpg
20200605_143552.jpg
20200605_143403.jpg
20200605_143440.jpg

Bob Chamberlain
Posts: 27
Joined: Thu Dec 15, 2016 11:11 pm

Re: 1.5" scale Pyle National type K2 generator

Post by Bob Chamberlain » Thu Jun 11, 2020 10:57 am

PM sent please contact

NZsteamer
Posts: 13
Joined: Wed Jun 10, 2020 9:38 pm
Location: New Zealand

Re: 1.5" scale Pyle National type K2 generator

Post by NZsteamer » Thu Jun 11, 2020 11:07 pm

NZsteamer wrote:
Wed Jun 10, 2020 10:16 pm
I have a working Pyle National Type K2 generator that I would like to sell. I normally supply casting sets to modelers around the world via eBay but I decided to jump in and make a working generator. I have done this once before and that went to a gentleman in Australia. My main reason for making the working generator is because the foundry I use to make these castings has recently decided to drastically increase their prices so the castings on their own have become a little expensive for what people are happy to pay.
I have had this generator under load and with 75psi air it was happily driving a 12v 5w automotive bulb and still producing around 13v. It produced nearly 15v with higher pressure so would benefit from some electronic voltage regulation.
I'm looking for $2000 for this unit including shipping worldwide.
Please PM me for enquiries about this unit or for my casting sets.
Chris A.
Happy to say this is now sold.

Post Reply