Working Pyle National type K2 generator in 2" scale ****SOLD****

For the Buying/Selling/Trading of items of interest to those of us in the Live Steam Hobby.

Moderators: gwrdriver, Harold_V

Post Reply
NZsteamer
Posts: 23
Joined: Wed Jun 10, 2020 9:38 pm
Location: New Zealand

Working Pyle National type K2 generator in 2" scale ****SOLD****

Post by NZsteamer »

I have available for sale a fully working Pyle National Type K2 turbo generator.
This is in 2" scale for those who are building models based on 3' 6" full size for 7.5" or 7.25" gauge models. I have built this to last with sealed roller bearings and a brushless alternator. It also includes a built in solid state voltage regulator which is adjustable for voltages from 3-15 volts DC. This is accessed by opening the generator door. This is also where you connect wiring as per the full size
The actual item is of brass construction and is approx 3.25" (82mm) long. 2" (52mm) high and 1.88" (48mm) wide. This has been made using lost wax castings that I supply in both 1.5" and 2" scale. These are very detailed and have been directly modelled off a full size generator along with detailed information from the Pyle National Type K and K2 manual.
This unit has been run on air and produces 12v with very little noise.
I need to get $2000 for this unique item which includes shipping.
Please PM me for any questions
Attachments
20200715_101928.jpg
20200715_101923.jpg
20200715_101937.jpg
20200715_101945.jpg
20200715_101953.jpg
NZsteamer
Posts: 23
Joined: Wed Jun 10, 2020 9:38 pm
Location: New Zealand

Re: Working Pyle National type K2 generator in 2" scale

Post by NZsteamer »

Feel free to email me at frances_chris @xtra.co.nz
NZsteamer
Posts: 23
Joined: Wed Jun 10, 2020 9:38 pm
Location: New Zealand

Re: Working Pyle National type K2 generator in 2" scale

Post by NZsteamer »

Happy to say this is now SOLD. will be working on producing another of these in the near future so please contact me if you are after one of these. Also coming will be 1.5" scale units
Post Reply