I have a Republic Lagun FTV-03 mill that has been converted to CNC using Mach 3 Software. When it was converted to Mach 3 the motors were replaced as well as the ball screws. The belts in the head were replaced a couple years ago. It has a power drawbar, which was also replaced at the same time. There's a FogBuster Cooling & Lub system that's tied into Mach 3. It's is set up to use CAT40 tooling.
It DOES NOT include a vice or any tooling.
There is a loading dock available for moving purposes.
Selling it as I'm moving and don't have a place to store it. Available for inspection under power in South Elgin, IL
Photos & Video on my Fickr page: https://www.flickr.com/photos/41428530@N03/
Republic Lagun LTV-3 - $4000
Moderators: gwrdriver, Harold_V
-
- Posts: 75
- Joined: Sun Jan 13, 2013 12:26 pm
Republic Lagun LTV-3 - $4000
Mark Petersen
12" x 36" Logan Lathe
12" x 36" Logan Lathe
-
- Posts: 75
- Joined: Sun Jan 13, 2013 12:26 pm