3/4" Brake cylinder casting set.

For the Buying/Selling/Trading of items of interest to those of us in the Live Steam Hobby.

Moderators: Harold_V, WJH, gwrdriver

Post Reply
User avatar
JBodenmann
Posts: 2897
Joined: Sun Oct 26, 2003 1:37 pm
Location: Tehachapi, California

3/4" Brake cylinder casting set.

Post by JBodenmann » Thu Oct 27, 2011 3:50 pm

Hello My Friends
Here is the 3/4" brake cylinder casting set. It consists of 5 bronze castings. Front cylinder head, rear cylinder head, cylinder casting, clevis casting, and rear lever mount to be bolted to the rear cylinder head. They are bronze investment castings and the cylinder can be finished 5/8" to 23/32". If there is sufficient interest I can provide the cylinder machined with a stainless piston rod and return spring, brass piston with teflon cup seal, and assembled with the correct T bolts holding the cylinder heads in place. Price for casting set with drawing is $112.00
Thanks
Jack
Attachments
BrakeCylinder.jpg

Andy R
Posts: 191
Joined: Wed Sep 26, 2007 2:18 pm
Location: So. Calif.

Re: 3/4" Brake cylinder casting set.

Post by Andy R » Thu Oct 27, 2011 7:15 pm

Nice!
One set for me, please, Jack.
Regards,
Andy

User avatar
JBodenmann
Posts: 2897
Joined: Sun Oct 26, 2003 1:37 pm
Location: Tehachapi, California

Re: 3/4" Brake cylinder casting set.

Post by JBodenmann » Sat Oct 29, 2011 7:25 pm

Hi Andy
It will be in the mail Monday Morning.
Jack

KidAmato
Posts: 93
Joined: Thu May 19, 2011 9:31 pm

Re: 3/4" Brake cylinder casting set.

Post by KidAmato » Sat Dec 03, 2011 7:59 pm

jack,
How much would the fully machined RTR cylinder be?
7-1/2” gauge 5” scale 2-4-4t
7-1/2” gauge Fitchburg Northern
4-3/4” gauge 1.5” scale 0-4-4t
3-1/2" gauge Kozo a3 narrow gauge bash
3-1/2” gauge large boiler Tich

Post Reply