FS Bagley Oil Burners

[Harlock]

The thumpeta thumpeta noise is indeed due to a lack of air. The kero is snuffing out and re-igniting multiple times per second, causing the thumpeta. It's suffocating itself. An oil burner that does not have enough secondary combustion air also tends to be finnicky because if it's just a little too lean, it will get sucked out because it's already starved. Allowing more air in the firebox will make it easier to operate in addition to cleaning up the noise. This is typically a firebox setup issue and not a burner issue directly.

-M

[DJSteamer3017]

Are these available or can these be used in 1" Scale Steam Locomotives? Thanks and Keep on Steamin' My Friend!!

David

[Will's 2882]

David
I've been run my one inch Atlantic for over 20 years with this burner.
It has never failed me to work perfect every time.
Will

[DJSteamer3017]

David
I've been run my one inch Atlantic for over 20 years with this burner.
It has never failed me to work perfect every time.
Will

Sweet so the burners are a one size fits all? In this case 1.5" and 1"?

David

[dnevil]

Will Campbell graciously allowed the IBLS to publish the installation and operation instructions provided with the Bagley Oil Burner.

http://ibls.org/mediawiki/index.php?tit ... structions

Enjoy,
Daris Nevil
IBLS Webmaster

[ChipsAhoy]

I attempted to reach "Bagley Oil Burners.
I went to this site... looks like nothing changed since 2013 here:
http://ibls.org/mediawiki/index.php?tit ... Oil_Burner

I've sent e-mails to this address:
mrstraingod@yahoo.com

And have no response.

Does anyone know how to contact them? or if they still exist?

Or perhaps better yet, another supplier of this style? (I've heard good things about it)
Or a good alternative.

I'm building an Allens Ten Wheeler, and am not on air yet so there is no rush, I'm just trying to get and stay ahead.

Thx for anyhelp.

Post Script:

I have received a PM to the effect that they may in fact still be in business but suffering some temporary difficulties. So In all fairness I suggest that anyone looking for the nozzles be patient and/or perhaps post in the wanted section as there are those who may have some for sale.

[tyleire]

Sorry to revive an old thread but I'm in need of one of their burners as well. Anyone have any luck contacting them lately? I've reached out multiple times with no success.

[kenrinc]

I've contacted them multiple times over the last year with no response.

Ken-

[TEAMTSM]

i can get a hold of them and find out the status of burners and i will let you know

[optigman]

I have also called and emailed numerous times in the past few months with no reply at all. I would like to buy a Bagley Burner if possible. Thanx for attempting to get in touch with them and letting us know. Richard

[TEAMTSM]

got in touch with them and yes they have some and if you like you can call me or email me and i will get your ordered handled
steve@tsmenhanced
520-971-6725
i am headed to sacramento right now for the live steam meet be back monday i will can answer any other questions then.

thank you