larger boring bar for sale

This forum is for Internal Combustion Engines such as Hit 'n Miss, Throttle Goverened One Lungers etc. Repair, Machining, Operation, Buy/Sell/Trade of these engines are all topical.

Moderator: Harold_V

Post Reply
jim fuchs

larger boring bar for sale

Post by jim fuchs » Wed Mar 10, 2004 3:18 am

i have a storm vulcan boring bar model nk6. i very good shape . this is a big bar ,bores from 3.5 to 7.700 inchs full and complete tool kit . would be good for larger engines 1500 plus shiping . or will trade for a smaller bar in good shape . jim

jfuchs3013@aol.com

User avatar
cprucha
Posts: 67
Joined: Thu Jan 16, 2003 7:42 am
Location: Western, NY
Contact:

Re: larger boring bar for sale

Post by cprucha » Wed Mar 10, 2004 7:13 am

Hi Jim,

Would it be possible to post a photo of the boring bar? I have quite a few questions a photo might answer. Thanks, Craig...


<A HREF="http://www.antique-engine.com">Antique Gas Engine Website</A>
Registered Linux User #157284

User avatar
cprucha
Posts: 67
Joined: Thu Jan 16, 2003 7:42 am
Location: Western, NY
Contact:

Re: larger boring bar for sale

Post by cprucha » Thu Mar 11, 2004 5:44 am

Am posting these (2) photos of the large boring bar for Jim...

<A HREF="http://www.oldengine.org/members/cpruch ... gbar01.jpg">
Boring Bar</A>

<A HREF="http://www.oldengine.org/members/cpruch ... gbar02.jpg">
Tooling and Accessories</A>



<A HREF="http://www.antique-engine.com/">Antique Gas Engine Website</A>
Registered Linux User #157284

jim fuchs

Re: larger boring bar for sale

Post by jim fuchs » Thu Mar 11, 2004 3:31 pm

thanks for posting the pics of the bar craig is there eny other web sights that i could post it at ,would be great for doing the old tractors. its in good shape, with a manual,and tool kit . jim

Image

Image

User avatar
cprucha
Posts: 67
Joined: Thu Jan 16, 2003 7:42 am
Location: Western, NY
Contact:

Re: larger boring bar for sale

Post by cprucha » Fri Mar 12, 2004 5:53 am

Hi Jim,

There is a big antique gas engine web site that has a for sale page or pages. You will see all the web pages and sale pages available, on the left side of the following web page. <A HREF="http://www.enginads.com/barnsale.cgi">Barn Sale Web Page</A>. See ya, Craig...




<A HREF="http://www.antique-engine.com/">Antique Gas Engine Website</A>
Registered Linux User #157284

817jdg
Posts: 14
Joined: Sat Feb 06, 2010 11:23 pm
Location: minnesota

Post by 817jdg » Sun Feb 21, 2010 11:19 am

Hi there your email doesnt seem to work send me a pm. Where are you from??

showard
Posts: 1
Joined: Thu Jul 22, 2010 3:58 pm

Re: larger boring bar for sale

Post by showard » Thu Jul 22, 2010 7:30 pm

I worked at Storm Vulcan in 1978 till 1982
I was just 21 when i started, all the guys were really old there my boss had worked there 30 years.
It was a tough place to work for. they ran off all the new guys and all the young guys, but i lasted. lol
In 1980 i was in that tin roof factory working 12 hr. days (sun up to sun down) and it was a record heat wave summer!
well over 100 degrees everyday for months!
we wore long shirts and pants and steel toed booted. no A.C. it was like 130 in side the tin roof with all the machines running and grinding dust in the air.
i made head and tail milling machines.
crankshaft and camshaft grinding machines.
canshaft wielding machines,
engine block washers.
all the machinist were world war two (ww2) war machine makers and were all on there way out as i entered the buisness.
then CNC and PC came in in the 80's and no real machinest were being made anymore. now its a dead craft.

every one wants to either go to china, or slam a mastercam file into a cnc and have a low pay operator stand in front to load and unload.

SOrry to go crazy...yes i cut my Teeth at Storm Vulcan.. and now i have a CNC in my garage and use solidworks and mastercam.
and just joined this site today...
I can drive to storm vulcan still (its in dallas on Burbank st.) about a 30min. drive for me.

woyaodixingfu
Posts: 12
Joined: Wed Sep 01, 2010 3:53 am

Re: larger boring bar for sale

Post by woyaodixingfu » Sat Sep 04, 2010 4:40 am

You can in some machinery on the website to sell your information

Post Reply