went to a show today and this is what was there

This forum is for Internal Combustion Engines such as Hit 'n Miss, Throttle Goverened One Lungers etc. Repair, Machining, Operation, Buy/Sell/Trade of these engines are all topical.

Moderator: Harold_V

Post Reply
endmill
Posts: 121
Joined: Tue Nov 06, 2007 7:06 pm
Location: Nashport,Oh

went to a show today and this is what was there

Post by endmill » Sun Oct 20, 2013 8:08 pm

If I understood the owner right, while trying to keep tabs on my 4 yr. old grandson and through the noise of the engine. It was built in the 1800's for steam and converted for gas and it was a 2 cycle. NEAT !!
Attachments
100_5905 (640x480).jpg
100_5910 (640x480).jpg
100_5908 (640x480).jpg

User avatar
ken572
Posts: 2600
Joined: Sun Mar 14, 2010 8:11 pm
Location: Mesa, Arizona. 85201-1517

Re: went to a show today and this is what was there

Post by ken572 » Sun Oct 20, 2013 10:23 pm

endmill,

Thanks for sharing those engine picks. VERY COOL. 8)

Ken. :)
One must remember.
The best learning experiences come
from working with the older Masters.
Ken.

Post Reply