Sites

We all have a collection of favorite websites. Use this forum to post and share them!

Moderators: websterz, JackF

Post Reply
Jose Rivera
Posts: 3802
Joined: Wed Feb 21, 2007 9:21 pm
Location: Vallejo California

Sites

Post by Jose Rivera » Sat Jun 28, 2008 1:14 pm

Cool!

A new section, thanks Marty!!

Here are tree sites that I use for inspiration when I feel down on machining and cannot get fresh ideas.

http://www.craftsmanshipmuseum.com/
( My brother is featured there, http://www.craftsmanshipmuseum.com/Rivera.htm, thought I mention :D )

http://www.jrbentley.com/
Every time that I look at John R. Bentley's site and admire his work I end up getting mad at myself for not having such inspiration as he does.

Here is quote in answer to an e-mail I sent to him:

"My background was in the technical side of radio broadcasting - studio and transmitter site setups. As part of my work I often designed and constructed custom audio and switching components on location. I started at the end of the sixties, when radio was full of electromechanical devices.

I found the switch to model-making/machining from electronics not difficult - the general idea is the same - you are making something from basic materials."

http://barronaviation.com/Default.aspx?tabid=130&pid=0
Then last bout not least, Jerry Vaugh who I hope that is totally recovered from a tough operation short time ago.
Here is proof that is not the tool what counts, but how you use it :roll:

I actually called him in disbelieve on a posting about him in chaski, saying that he did those engines with a little Grizzly 3 in 1.
On the phone he said that yes, is all he used to make those no-working engines.

I hope that you guys will enjoy these sites as much as I do every time I visit them.
There are no problems, only solutions.
--------------
Retired journeyman machinist and 3D CAD mechanical designer - hobbyist - grandpa

peter08
Posts: 7
Joined: Mon Aug 20, 2007 11:47 am
Location: Clinton Township, MI

re: websites

Post by peter08 » Fri Sep 19, 2008 1:36 pm

Check out this list of metalworking websites on MFGX.com, its huge!
*but not too huge

4/14/09 edit: Sorry, the above link is gone, they removed the link page.
Last edited by peter08 on Tue Apr 14, 2009 11:38 am, edited 1 time in total.

TNMIKE
Posts: 1
Joined: Fri Apr 10, 2009 3:19 pm
Location: WNC/TN

Jerry's work is unreal

Post by TNMIKE » Mon Apr 13, 2009 5:30 pm

The Jerry Vaugh site/work is great. To think he did all of that on a 3-1 tool is unbeleivable.

Thanks for sharing that

Post Reply