Cool!
A new section, thanks Marty!!
Here are tree sites that I use for inspiration when I feel down on machining and cannot get fresh ideas.
http://www.craftsmanshipmuseum.com/
( My brother is featured there, http://www.craftsmanshipmuseum.com/Rivera.htm, thought I mention )
http://www.jrbentley.com/
Every time that I look at John R. Bentley's site and admire his work I end up getting mad at myself for not having such inspiration as he does.
Here is quote in answer to an e-mail I sent to him:
"My background was in the technical side of radio broadcasting - studio and transmitter site setups. As part of my work I often designed and constructed custom audio and switching components on location. I started at the end of the sixties, when radio was full of electromechanical devices.
I found the switch to model-making/machining from electronics not difficult - the general idea is the same - you are making something from basic materials."
http://barronaviation.com/Default.aspx?tabid=130&pid=0
Then last bout not least, Jerry Vaugh who I hope that is totally recovered from a tough operation short time ago.
Here is proof that is not the tool what counts, but how you use it
I actually called him in disbelieve on a posting about him in chaski, saying that he did those engines with a little Grizzly 3 in 1.
On the phone he said that yes, is all he used to make those no-working engines.
I hope that you guys will enjoy these sites as much as I do every time I visit them.
Sites
Moderator: JackF
-
- Posts: 3803
- Joined: Wed Feb 21, 2007 9:21 pm
- Location: Vallejo California
Sites
There are no problems, only solutions.
--------------
Retired journeyman machinist and 3D CAD mechanical designer - hobbyist - grandpa
--------------
Retired journeyman machinist and 3D CAD mechanical designer - hobbyist - grandpa
re: websites
Check out this list of metalworking websites on MFGX.com, its huge!
*but not too huge
4/14/09 edit: Sorry, the above link is gone, they removed the link page.
*but not too huge
4/14/09 edit: Sorry, the above link is gone, they removed the link page.
Last edited by peter08 on Tue Apr 14, 2009 11:38 am, edited 1 time in total.
Jerry's work is unreal
The Jerry Vaugh site/work is great. To think he did all of that on a 3-1 tool is unbeleivable.
Thanks for sharing that
Thanks for sharing that