Plastic couplers
Moderator: Harold_V
Plastic couplers
I know that a whole bunch of plastic couplers were sold at the Train Mountain Triennial in 2015. They have been out there now for 2 years. I have no stake in this company, but am just wondering how they have held up for people. I have had a set on 2 of my cars and so far have not had any problems at all.
I am looking to hear from people who bought them and have used them. I am looking to learn if any have failed, or if anyone feels they are unsafe. I want to move the couplers to more of my cars but just want to do due diligence. Unless you have a pair in your hands, I am not really looking for your opinions.
Thanks.
I am looking to hear from people who bought them and have used them. I am looking to learn if any have failed, or if anyone feels they are unsafe. I want to move the couplers to more of my cars but just want to do due diligence. Unless you have a pair in your hands, I am not really looking for your opinions.
Thanks.
- Dave_Johnson
- Posts: 238
- Joined: Thu Jan 09, 2003 8:13 pm
- Location: Winchester, Virginia
Re: Plastic couplers
I put one on my stock car. I use it for a propane car, so it is the first coupler behind the loco. I pull 8 cars, sometimes more. The coupler has never failed.
Re: Plastic couplers
This topic just came up at our local club (Annetta Valley & Western RR). My friend Terry wrote the following:
Daris
Hope this helps.I bought a pair of these just to see how they would do. They couple with almost everything we have at the track, but I did find a couple of older couplers that they did not mate with. With those, I could not get the plastic knuckles to close far enough to lock. They DO seem to be strong enough to include in a fairly lengthy train. Overall, I'd recommend them.
Daris
Re: Plastic couplers
Plastic coupler between tender and propane carrying car? You're welcome to use that coupler as you see fit, but that wouldn't be my first choice for a plastic coupler application. Sorry. Even if equipped with safety chains...would prefer (and some clubs require) some kind of metal draw bar...either steel bar stock or a cast iron drawbar coupler. Just another $.02. Carl B.
Life is like a sewer...what you get out of it depends on what you put into it!
I don't walk on water...I just learned where some of the stepping stones are!
I love mankind...it's some of the people I can't stand!
I don't walk on water...I just learned where some of the stepping stones are!
I love mankind...it's some of the people I can't stand!
Re: Plastic couplers
Hmmm. If you'd have mentioned ductile iron, I might agree, but (gray) cast iron is not known for its tensile strength, and may offer a similar risk of failure as would plastic.ccvstmr wrote: or a cast iron drawbar coupler.
H
Wise people talk because they have something to say. Fools talk because they have to say something.
Re: Plastic couplers
Harold...have to admit, don't know what material the coupler draw bar was cast in. It was a commercially available product that I've been running between the tender and fuel car for 16 years. Still, I have a pair of safety chains between the two pieces of rolling stock. If nothing else, the chains help keep the fuel and air brake lines from hanging too low (although those were cut to prevent dragging). Carl B.
Life is like a sewer...what you get out of it depends on what you put into it!
I don't walk on water...I just learned where some of the stepping stones are!
I love mankind...it's some of the people I can't stand!
I don't walk on water...I just learned where some of the stepping stones are!
I love mankind...it's some of the people I can't stand!
-
- Posts: 40
- Joined: Sun Feb 05, 2017 9:43 pm
- Location: Ann Arbor, MI & Zephyrhills, FL
- Contact:
Re: Plastic couplers
Tom Bee and Dennis Goodman both produce dummy coupler drawbars in very high quality ductile iron. They will never break. I wonder how the the plastic couplers compare to the old cast aluminum couplers popular in the early days of the hobby. Knuckles breaking in derailments are always the big problem in the cast aluminum and also the grey iron
couplers.
couplers.
0-4-0
4-6-0
4-4-2
4-4-0
2-6-0(2)
5 batt elec
44 cars rolling stock
2400' 7 1/2" track
4-6-0
4-4-2
4-4-0
2-6-0(2)
5 batt elec
44 cars rolling stock
2400' 7 1/2" track
- Adirondack
- Posts: 410
- Joined: Tue Aug 23, 2011 6:59 pm
- Location: southern CT
Re: Plastic couplers
I've not had any luck locating the plastic couplers. Can anyone point me in the direction of a commercial source?
Thanks
ADK
Thanks
ADK
Adirondack Car & Foundry
Check out our projects: https://www.facebook.com/ADKrail/
Visit our ALL-NEW online store: https://adirondackcarfoundry.square.site/
A little locomotive with 4 wheels on the track is a lot more fun
than a 1/2 finished one with 16 wheels on the bench!
Check out our projects: https://www.facebook.com/ADKrail/
Visit our ALL-NEW online store: https://adirondackcarfoundry.square.site/
A little locomotive with 4 wheels on the track is a lot more fun
than a 1/2 finished one with 16 wheels on the bench!
-
- Posts: 1728
- Joined: Thu Jan 09, 2003 6:50 pm
- Location: Michigan, USA
Re: Plastic couplers
Enterprise Plastics, the plastic tie people.
www.eprailsystem.com
www.eprailsystem.com
- Adirondack
- Posts: 410
- Joined: Tue Aug 23, 2011 6:59 pm
- Location: southern CT
Re: Plastic couplers
Thanks Marty. I tried to email them but it bounced. I guess a phone call is in order.Marty_Knox wrote: ↑Sat Jul 07, 2018 11:57 am Enterprise Plastics, the plastic tie people.
www.eprailsystem.com
ADK
Adirondack Car & Foundry
Check out our projects: https://www.facebook.com/ADKrail/
Visit our ALL-NEW online store: https://adirondackcarfoundry.square.site/
A little locomotive with 4 wheels on the track is a lot more fun
than a 1/2 finished one with 16 wheels on the bench!
Check out our projects: https://www.facebook.com/ADKrail/
Visit our ALL-NEW online store: https://adirondackcarfoundry.square.site/
A little locomotive with 4 wheels on the track is a lot more fun
than a 1/2 finished one with 16 wheels on the bench!
Re: Plastic couplers
I have found that Bachman plastic couplers while being too small for 1-1/2 scale are just the right size for 3/4 scale and oversize for 3/8 and G scales.
Mr.Ron from South Mississippi
- Adirondack
- Posts: 410
- Joined: Tue Aug 23, 2011 6:59 pm
- Location: southern CT
Re: Plastic couplers
Ron, do you mean their G scale couplers, or their 1:20.3?
Very interesting, as I build narrow gauge on in 1 3/4" scale on 3 1/2" gauge.
Thanks!
ADK
Adirondack Car & Foundry
Check out our projects: https://www.facebook.com/ADKrail/
Visit our ALL-NEW online store: https://adirondackcarfoundry.square.site/
A little locomotive with 4 wheels on the track is a lot more fun
than a 1/2 finished one with 16 wheels on the bench!
Check out our projects: https://www.facebook.com/ADKrail/
Visit our ALL-NEW online store: https://adirondackcarfoundry.square.site/
A little locomotive with 4 wheels on the track is a lot more fun
than a 1/2 finished one with 16 wheels on the bench!