475 PSI? I find that difficult to believe.ERIE S-1 BERKSHIRES wrote: ↑Sun Jan 27, 2019 6:15 pm This system is high-volume low-pressure so it never reaches high pressure, Under full load I think it reaches 475 PSI before the wheels slip, rail systems use this for a long time I know of four engines this use the same setup haven't failed yet, and as for the two stage pump there is a pressure setting that will not allow it to kick down!
Gas hydraulic schematic
Moderator: Harold_V
Re: Gas hydraulic schematic
———————————————————————————————————————————————————————
Music isn’t at all difficult. All you gotta do is play the right notes at the right time!
Music isn’t at all difficult. All you gotta do is play the right notes at the right time!
Re: Gas hydraulic schematic
Erie S1
Thanks for the drawing. I have not received it yet. Should be in my hands in the next day or so as long as Rodger remembers.
Thanks for the drawing. I have not received it yet. Should be in my hands in the next day or so as long as Rodger remembers.
-
- Posts: 105
- Joined: Sun Jan 25, 2009 12:43 pm
- Location: Barberton Ohio
Re: Gas hydraulic schematic
The filter outside of the tank should be a return filter, omit the outside suction filter, this summer I should have my sp1 Narrow Gauge Little Giant at NEOLS this summer open meet if you need to see it up close