I’ve read about a gas electric at Maricopa, and I saw an ad for one a few years ago on DLS. Subsequently I also read that one was damaged or destroyed in a garage fire.
I’d be interested in any information on 1-1/2”scale Santa Fe gas electrics, particularly build information and photos.
Thanks!
Brian
Santa Fe gas electrics
Moderator: Harold_V
- makinsmoke
- Posts: 2260
- Joined: Thu Jul 10, 2003 12:56 pm
- Location: Texas Hill Country
Re: Santa Fe gas electrics
I owned a 7.5 model of the Santa Fe m-190. It was acquired in Phoenix I think in the late 90’s. Your info is correct as I sold it to a gentleman I believe from Iowa where it was subsequently destroyed in a garage fire.
I am currently. I will try to dig up some pics, but it may take awhile.
Kevin
I am currently. I will try to dig up some pics, but it may take awhile.
Kevin
- makinsmoke
- Posts: 2260
- Joined: Thu Jul 10, 2003 12:56 pm
- Location: Texas Hill Country
Re: Santa Fe gas electrics
Thanks Kevin.
So sad it’s gone.
Other than trolley cars there are very few of these types of equipment in our scale.
Looking forward to any pics.
Brian
So sad it’s gone.
Other than trolley cars there are very few of these types of equipment in our scale.
Looking forward to any pics.
Brian
- Benjamin Maggi
- Posts: 1409
- Joined: Wed Apr 25, 2007 10:38 pm
- Location: Albany, NY
Re: Santa Fe gas electrics
I think a Budd RDC car would be a great offering by a manufacturer. Self-contained, lots of railroads owned them, and the stainless steel would be easy to maintain. The only downside might be the length, as an RDC-1 was 85' long (10.5' scaled down to 1/8 size).
Riding Railkits had them in 1" scale... not sure if they were originally developed by Iron Pony or not.
Riding Railkits had them in 1" scale... not sure if they were originally developed by Iron Pony or not.
"One cannot learn to swim without getting his feet wet." - Benjamin Maggi
- Building: 7.25" gauge "Sweet Pea" named "Catherine"
- Building: 7.25" gauge "Sweet Pea" named "Catherine"
- johnpenn74
- Posts: 404
- Joined: Tue May 04, 2010 12:54 pm
- Location: Waiting for next assignment!
Re: Santa Fe gas electrics
Gas electrics....
Well this isn't exactly what you were searching for, but it is a working GAS - Electric. Paul at CSME put it together in the last few months. It is based on a Central New Jersey diesel electric. The prototype being in the Baltimore & Ohio Railroad Museum.
Small gas motor pulling a chain connected to a perm mag DC motor (used as generator). Then some relay switch gear for road or shunt. Finally it reaches the perm mag DC on each truck.
Since the generator is permanent magnet, there is no need for diode bridge, wave rectifier, etc.
Throttle the engine and the load goes faster.
JP
Well this isn't exactly what you were searching for, but it is a working GAS - Electric. Paul at CSME put it together in the last few months. It is based on a Central New Jersey diesel electric. The prototype being in the Baltimore & Ohio Railroad Museum.
Small gas motor pulling a chain connected to a perm mag DC motor (used as generator). Then some relay switch gear for road or shunt. Finally it reaches the perm mag DC on each truck.
Since the generator is permanent magnet, there is no need for diode bridge, wave rectifier, etc.
Throttle the engine and the load goes faster.
JP
John Pennington
Logging meets that actually move logs
Project
2 Mich-Cal Shays
Allen 4-4-0 Narrow Gauge Conversion
Two Reading A5a Camelback 0-4-0
USRA 0-6-0
Clishay
4 Western Wheeled Scraper NG Dump Cars
N&W 4-8-2
ICM 2-10-2
4 Modern Stake Cars
L&N Caboose
4 Big Four Conversion Gondolas
Like I'm actually gonna build all this stuff
Logging meets that actually move logs
Project
2 Mich-Cal Shays
Allen 4-4-0 Narrow Gauge Conversion
Two Reading A5a Camelback 0-4-0
USRA 0-6-0
Clishay
4 Western Wheeled Scraper NG Dump Cars
N&W 4-8-2
ICM 2-10-2
4 Modern Stake Cars
L&N Caboose
4 Big Four Conversion Gondolas
Like I'm actually gonna build all this stuff