Does anyone recognize these 3D prints?

This forum is dedicated to Riding Scale Railroading with propulsion using other than steam (Hydraulics, diesel engines, gas engines, electric motors, hybrid etc.)

Moderator: Harold_V

Post Reply
User avatar
Adirondack
Posts: 410
Joined: Tue Aug 23, 2011 6:59 pm
Location: southern CT

Does anyone recognize these 3D prints?

Post by Adirondack »

Hey folks. I had these images in my "research" folder. I am progressing with my 3/4" scale high-line SW1500 project, and wanted to see if I could ask the designer of these parts a few questions.

I have no idea where I saw them first, but given the filenames, Facebook might be a good place to start.

Thanks

Chris
Attachments
72316825_2468643086565236_4953175767165960192_n.jpg
71501012_2468643376565207_2529830634646405120_n.jpg
72087133_2468643336565211_1218799392325107712_n.jpg
71714147_2468643249898553_879317875804864512_n.jpg
71297402_2468643219898556_1446922916645044224_n.jpg
71534891_2468643139898564_5010300455700398080_n.jpg
Adirondack Car & Foundry
Check out our projects: https://www.facebook.com/ADKrail/
Visit our ALL-NEW online store: https://adirondackcarfoundry.square.site/

A little locomotive with 4 wheels on the track is a lot more fun
than a 1/2 finished one with 16 wheels on the bench!
WJH
Posts: 1417
Joined: Sat Jan 16, 2010 9:29 pm
Location: Florida

Re: Does anyone recognize these 3D prints?

Post by WJH »

Well, I do know there is an open source locomotive on Thingiverse for Gauge 1. It's either a SW1500 or RS3. Pretty sure it is a SW1500. You may want to look there.
User avatar
Adirondack
Posts: 410
Joined: Tue Aug 23, 2011 6:59 pm
Location: southern CT

Re: Does anyone recognize these 3D prints?

Post by Adirondack »

WJH wrote: Thu Feb 27, 2020 1:17 am Well, I do know there is an open source locomotive on Thingiverse for Gauge 1. It's either a SW1500 or RS3. Pretty sure it is a SW1500. You may want to look there.
No, these are different. Much, much more detailed than the files in that model.

Thanks

Chris
Adirondack Car & Foundry
Check out our projects: https://www.facebook.com/ADKrail/
Visit our ALL-NEW online store: https://adirondackcarfoundry.square.site/

A little locomotive with 4 wheels on the track is a lot more fun
than a 1/2 finished one with 16 wheels on the bench!
Slipped Eccentric
Posts: 66
Joined: Thu Sep 14, 2006 8:44 pm
Location: Nanticoke, Pa

Re: Does anyone recognize these 3D prints?

Post by Slipped Eccentric »

That would be me.
WJH
Posts: 1417
Joined: Sat Jan 16, 2010 9:29 pm
Location: Florida

Re: Does anyone recognize these 3D prints?

Post by WJH »

Slipped Eccentric wrote: Fri Feb 28, 2020 11:07 pm That would be me.
Do you have more information on your project? A thread? Web page?
Slipped Eccentric
Posts: 66
Joined: Thu Sep 14, 2006 8:44 pm
Location: Nanticoke, Pa

Re: Does anyone recognize these 3D prints?

Post by Slipped Eccentric »

Nothing really to report. Got those prints back, need to change a few things and completely sort out the drive before I can go any further. Do have the majority of an S4 drawn up to go on top of them but so many projects and only so much time.
Post Reply