Arch Support ... no - not for my shoes :-)

This forum is dedicated to Riding Scale Railroading with propulsion using other than steam (Hydraulics, diesel engines, gas engines, electric motors, hybrid etc.)

Moderator: Harold_V

Post Reply
User avatar
ChuckHackett-844
Posts: 175
Joined: Wed May 03, 2017 3:54 pm
Location: Tampa, Florida

Arch Support ... no - not for my shoes :-)

Post by ChuckHackett-844 » Fri Jan 14, 2022 10:19 am

I am replacing the arch in my 4-8-4 Northern (firebox about 12" x 18")

Looking for ideas on how to support it so that it is removable but will stay in place during trailering, etc.

This is a single piece arch "Z" bent from 3/32" steel. It can only be accessed when the boiler is lifted and the burner is removed.

I want to be able reach in through the fire door and to drop it off its supports to examine the flue sheet and fusible plug periodically by viewing through the fire door.
Regards,

Chuck Hackett, UP Northern 844, Mich-Cal Shay #2
Owner, MiniRail Solutions, RR Signal Systems (http://www.MiniRailSolutions.com)
"By the work, One knows the workman"

Post Reply