You could also run it at Wayne's place on lunch breaks...
Andy
1" scale GG-1
Moderator: Harold_V
-
- Posts: 2166
- Joined: Thu May 22, 2003 8:17 am
- Location: Bel Air, MD
Re: 1" scale GG-1
Clausing 10x24, Sheldon 12" shaper, ProtoTrak AGE-2 control cnc on a BP clone, Reed Prentice 14" x 30", Sanford MG 610 surface grinder, Kalamazoo 610 bandsaw, Hardinge HSL speed lathe, Hardinge HC chucker, Kearney and Trecker #2K plain horizontal mill, Haas TL-1 lathe.
Re: 1" scale GG-1
I would be interested in how the electronics are done to control all of the motors.
Christopher P. Mahony
Los Angeles Live Steamers
1 inch scale member
Los Angeles Live Steamers
1 inch scale member
Re: 1" scale GG-1
Hi Andy,
That is where I tested it.
Joe
That is where I tested it.
Joe
Re: 1" scale GG-1
hello cp4449
I am going to use a 4QD pro 150 controller.I do not think I am going to do a whole lot more this year,but who knows.I am working on a 3/4 scale Challenger that I would like to steam next year,and that is possible if I don't get too sidetracked,because I am also working on a 1 1/2 scale Heisler.
Joe
I am going to use a 4QD pro 150 controller.I do not think I am going to do a whole lot more this year,but who knows.I am working on a 3/4 scale Challenger that I would like to steam next year,and that is possible if I don't get too sidetracked,because I am also working on a 1 1/2 scale Heisler.
Joe
-
- Posts: 604
- Joined: Sun Feb 22, 2009 9:21 pm
- Location: massachusetts,usa
Re: 1" scale GG-1
Dear mr. Blackstone,
I remember taking that picture.What ever happend to Bill Bridges GG1?
Don.
I remember taking that picture.What ever happend to Bill Bridges GG1?
Don.
steamer
-
- Posts: 63
- Joined: Tue Jan 18, 2011 10:03 am
Re: 1" scale GG-1
This GG-1 recently sold, correct?