The Home Machinist!

I have a mill/drill/lathe in my garage that I need lifted onto its stand, and once bolted to the stand, the whole thing moved into place, all within my garage. The machine is 54" x 29" and the stand is 32" tall. The thing weighs 1,000#. The garage has 12 feet of headroom and an 8-foot high door to get through. The area where the machine is to go has a 4' loft protrusion leaving 7'8" headroom in that area. It is to go where the brown cabinet is behind the cart with the trains.

I live in the hills in the North Tustin area in Orange County, CA. If you have the resources to do the job and can use some cash for Christmas, let me know what it would cost.

Thanks,

Todd

if you have no luck many tool rental outfits rent these out for a reasonable amount

http://www.genie-lift.com/index.cfm?mf= ... dle%20Base

or one of these

http://www.bigjoeca.com/Narrow_Aisle_Lift_Trucks.html 75 dallors a day rents one with a hand pump.

Job is done.

Thanks