Hobby Machinist in Caledon Ontario?

This forum is for those individuals or small business to solicit requests for Service from those members of our group. Machining, Foundry work, Sheet Metal work etc. This site makes no guarranty of work or represenation by the users of this site. It merely attempts to provide a place to allow individuals the opportunity to meet and discuss needs and capabilities.

Moderator: Harold_V

Post Reply
revrnd
Posts: 366
Joined: Sun Dec 18, 2011 10:38 pm
Location: Ontario, Canada

Hobby Machinist in Caledon Ontario?

Post by revrnd »

A chap on a snowmobiling website is looking for someone to repair a V belt pulley.
I bought a used 20" commercial planer that was single phase to save on the converter expense (finally found one for sale).
It was missing a bolt and a key in the keyway.
This machine was made in Brazil I the late 80s. Pulley is not available as delta just sells cheap Chinese crap and will not source out of stock parts.
Pulley has a metric bore and is stepped/ two speed.

Will a machine shop chuck a 8-9"ish cast iron pulley on a lathe and bore it out to put a bushing in?
Anyone out in that area that could help?
Wolfgang
Posts: 184
Joined: Fri Jul 03, 2015 9:47 am
Location: S-W Ontario
Contact:

Re: Hobby Machinist in Caledon Ontario?

Post by Wolfgang »

Ontario is a huuuge place. Where art thou? w
Post Reply