Custom Letter Punch

This forum is for those individuals or small business to solicit requests for Service from those members of our group. Machining, Foundry work, Sheet Metal work etc. This site makes no guarranty of work or represenation by the users of this site. It merely attempts to provide a place to allow individuals the opportunity to meet and discuss needs and capabilities.

Moderator: Harold_V

Post Reply
User avatar
jim314159
Posts: 79
Joined: Fri Aug 15, 2008 3:27 pm
Location: Atlanta, GA, USA

Custom Letter Punch

Post by jim314159 »

Hello,

I'm curious to see if anyone can make me a custom .250" letter punch. I have my own little maker's mark that I traditionally put on completed projects and it'd be nice to have a standard punch that I can mix with a typical quarter inch hardened alphanumeric punch set.

It looks like a "J" and an "R" munged together and there's a crude drawing below to give you an idea. I really don't know where to start on such a project and it's likely the only time I'd ever make a punch, so I'm happy to pay someone else for their time, expertise and materials if they can craft one for me for a reasonable price.

Thanks,
jim
mark.jpg
mark.jpg (1.25 KiB) Viewed 6407 times
SteveM
Posts: 7763
Joined: Mon Jun 27, 2005 6:18 pm
Location: Wisconsin

Re: Custom Letter Punch

Post by SteveM »

You might want to try these guys if nobody here can do it:

http://microstamp.us

Steve
Post Reply