Need tool post "T" nut machined

This forum is for those individuals or small business to solicit requests for Service from those members of our group. Machining, Foundry work, Sheet Metal work etc. This site makes no guarranty of work or represenation by the users of this site. It merely attempts to provide a place to allow individuals the opportunity to meet and discuss needs and capabilities.

Moderator: Harold_V

Post Reply
nipperdog
Posts: 53
Joined: Mon Dec 26, 2011 10:56 pm
Location: 50 mi N/O Tampa Florida

Need tool post "T" nut machined

Post by nipperdog » Wed Jul 18, 2012 3:40 am

Hi: I am looking for someone who can machine a tool post T nut to fit my new Lathe. I do not own a mill or have anyone around here who could do it. I have the blank nut and can supply a drawing of the tool post slot............Lew

User avatar
GlennW
Posts: 6657
Joined: Sun Apr 15, 2007 9:23 am
Location: Florida

Re: Need tool post "T" nut machined

Post by GlennW » Wed Jul 18, 2012 6:26 am

What Country are you in?
Glenn

Operating machines is perfectly safe......until you forget how dangerous it really is!

nipperdog
Posts: 53
Joined: Mon Dec 26, 2011 10:56 pm
Location: 50 mi N/O Tampa Florida

Re: Need tool post "T" nut machined

Post by nipperdog » Wed Jul 18, 2012 9:04 am

Glenn Wegman wrote:What Country are you in?
Hi Glenn: North west Florida, Citrus County

Harold_V
Posts: 17199
Joined: Fri Dec 20, 2002 11:02 pm
Location: Onalaska, WA USA

Re: Need tool post "T" nut machined

Post by Harold_V » Wed Jul 18, 2012 2:44 pm

nipperdog wrote:
Glenn Wegman wrote:What Country are you in?
Hi Glenn: North west Florida, Citrus County
Perhaps you can see the wisdom of adding your location to your file, so others know how (or if) they can offer you help.

Harold
Wise people talk because they have something to say. Fools talk because they have to say something.

nipperdog
Posts: 53
Joined: Mon Dec 26, 2011 10:56 pm
Location: 50 mi N/O Tampa Florida

Re: Need tool post "T" nut machined

Post by nipperdog » Thu Aug 09, 2012 8:06 pm

Job is done. Thanks to all who replied................Lew

Post Reply