Need Someone With a Small Forklift, In Orange Co., CA Area

This forum is for those individuals or small business to solicit requests for Service from those members of our group. Machining, Foundry work, Sheet Metal work etc. This site makes no guarranty of work or represenation by the users of this site. It merely attempts to provide a place to allow individuals the opportunity to meet and discuss needs and capabilities.

Moderator: Harold_V

Post Reply
toddalin
Posts: 284
Joined: Tue Nov 13, 2012 1:10 pm
Location: Orange County, CA
Contact:

Need Someone With a Small Forklift, In Orange Co., CA Area

Post by toddalin »

I have a mill/drill/lathe in my garage that I need lifted onto its stand, and once bolted to the stand, the whole thing moved into place, all within my garage. The machine is 54" x 29" and the stand is 32" tall. The thing weighs 1,000#. The garage has 12 feet of headroom and an 8-foot high door to get through. The area where the machine is to go has a 4' loft protrusion leaving 7'8" headroom in that area. It is to go where the brown cabinet is behind the cart with the trains.

I live in the hills in the North Tustin area in Orange County, CA. If you have the resources to do the job and can use some cash for Christmas, let me know what it would cost.

Thanks,

Todd

Image
Image
Image
hammermill
Posts: 2938
Joined: Sun Jun 27, 2010 10:43 pm
Location: pendleton or

Re: Need Someone With a Small Forklift, In Orange Co., CA Ar

Post by hammermill »

if you have no luck many tool rental outfits rent these out for a reasonable amount

http://www.genie-lift.com/index.cfm?mf= ... dle%20Base

or one of these

http://www.bigjoeca.com/Narrow_Aisle_Lift_Trucks.html 75 dallors a day rents one with a hand pump.
toddalin
Posts: 284
Joined: Tue Nov 13, 2012 1:10 pm
Location: Orange County, CA
Contact:

Re: Need Someone With a Small Forklift, In Orange Co., CA Ar

Post by toddalin »

Job is done.

Thanks
Post Reply