Lath work services needed

This forum is for those individuals or small business to solicit requests for Service from those members of our group. Machining, Foundry work, Sheet Metal work etc. This site makes no guarranty of work or represenation by the users of this site. It merely attempts to provide a place to allow individuals the opportunity to meet and discuss needs and capabilities.

Moderator: Harold_V

Post Reply
budwood
Posts: 1
Joined: Thu Apr 04, 2013 5:32 pm

Lath work services needed

Post by budwood » Thu Apr 04, 2013 8:22 pm

Need machinist services. I design and sell small optical receivers. The guy who did this for me retired. Now, need someone who has interest in machining small (1.5 inch max) parts, mostly in aluminum, to make parts to my drawings. Tolerances not tight, but parts need to fit together.

Location not too important, but prefer to work with someone from west USA or Canada.
bul150a-is05.pdf
This is what I design
(117.9 KiB) Downloaded 290 times

tmc_31
Posts: 35
Joined: Sun Jan 11, 2009 4:02 pm
Location: Merkel, Tx

Re: Lath work services needed

Post by tmc_31 » Wed Apr 10, 2013 1:06 am

PM Sent
Jet GHB-1340 Lathe, Washington mill/drill (RF31)

deltaenterprizes
Posts: 41
Joined: Sat Jan 06, 2007 5:16 pm
Location: longvew,tx

Re: Lath work services needed

Post by deltaenterprizes » Wed Jun 12, 2013 9:38 pm

I can do that! PM sent

Post Reply