4 jaw

Topics include, Machine Tools & Tooling, Precision Measuring, Materials and their Properties, Electrical discussions related to machine tools, setups, fixtures and jigs and other general discussion related to amateur machining.

Moderators: GlennW, Harold_V

Post Reply
Randall Va
Posts: 122
Joined: Sat Feb 20, 2010 9:42 pm

4 jaw

Post by Randall Va »

Hey fellows ,looking for a 4 jaw chuck for my southbend 9in,what ya'll think about this one http://www.amazon.com/Steelex-M1061-Jaw ... %2C+6-Inch
Thanks Randall
www.chaski.com
John Evans
Posts: 2366
Joined: Tue Jan 20, 2009 9:33 pm
Location: Phoenix ,AZ

Re: 4 jaw

Post by John Evans »

It is a plain back so you will need a threaded back plate to mount it with.
www.chaski.com
SteveM
Posts: 7763
Joined: Mon Jun 27, 2005 6:18 pm
Location: Wisconsin

Re: 4 jaw

Post by SteveM »

Don't know anything about the chuck, but you can get a threaded backplate from littlemachineshop.com for $39:

http://www.littlemachineshop.com/produc ... 1110836144

I used that for one of my chucks.

Steve
Randall Va
Posts: 122
Joined: Sat Feb 20, 2010 9:42 pm

Re: 4 jaw

Post by Randall Va »

Thanks fellows,I saw the enco promo codes and with free shipping it was 166.00 so I got it from enco.Thanks for posting the promo codes!
Randall
www.chaski.com
Post Reply