Making boring bar for tobin arp

Topics include, Machine Tools & Tooling, Precision Measuring, Materials and their Properties, Electrical discussions related to machine tools, setups, fixtures and jigs and other general discussion related to amateur machining.

Moderators: GlennW, Harold_V

Post Reply
Randall Va
Posts: 122
Joined: Sat Feb 20, 2010 9:42 pm

Making boring bar for tobin arp

Post by Randall Va »

My Tobin Arp line boring machine has a 1.125 dia. bar,I am making a smaller 1",tool bit is held in by hand screw in the end of bar pushing a 5/16 rod against the tool.
The end of bar is bored 9/16 dia.x 2.750 deep leaving 6-1/4" to drill for 5/16 rod,how would you fellows go about drilling 5/16 hole that deep?
Thanks Randall
Attachments
tobin arp 023.JPG
tobin arp 020.JPG
www.chaski.com
Randall Va
Posts: 122
Joined: Sat Feb 20, 2010 9:42 pm

Re: Making boring bar for tobin arp

Post by Randall Va »

Thanks guys
www.chaski.com
Post Reply