But deer do get old or sick, and black bear will take them. They also eat a few fawns. I agree that deer are not a major part of their diet, though.pete wrote:It would be pretty rare for a black bear to even try for a deer Bill. Way too quick for them unless it was old and/or sick. There mostly foragers and eat everything from fresh grass in the spring to grubs or anything dead. I have seen full grown grizzlys digging up fox dens and snacking on the new pups though. Not a pretty sight. PETA would be horrified I guess.
OT: Building in isolated location
-
- Posts: 1852
- Joined: Tue Dec 06, 2016 4:05 pm
- Location: Elmwood, Wisconsin
Re: OT: Building in isolated location
- neanderman
- Posts: 896
- Joined: Mon Jan 09, 2012 7:15 pm
- Location: Cincinnati, Ohio, USA
Re: OT: Building in isolated location
I've seen deer fencing as high as 8 feet...
Ed
LeBlond Dual Drive, 15x30
US-Burke Millrite MVI
Atlas 618
Files, snips and cold chisels
Proud denizen of the former "Machine Tool Capitol of the World"
LeBlond Dual Drive, 15x30
US-Burke Millrite MVI
Atlas 618
Files, snips and cold chisels
Proud denizen of the former "Machine Tool Capitol of the World"
Re: OT: Building in isolated location
Those 8' high fences are the norm here in the Hood River Valley, to protect the orchard fruit crops.neanderman wrote:I've seen deer fencing as high as 8 feet...
Still, we see evidence in our yard of bears getting into the cherry orchards.
It's the pits...
~RN
-
- Posts: 1852
- Joined: Tue Dec 06, 2016 4:05 pm
- Location: Elmwood, Wisconsin
Re: OT: Building in isolated location
That's the legal minimum for deer farms here in Wisconsin.neanderman wrote:I've seen deer fencing as high as 8 feet...
Re: OT: Building in isolated location
Interestingly, when my wife and I moved to Washington, we had chain link fence, 6' tall, installed in an area roughly 75' square (not 75 square feet). We've been here for more than 20 years and have never had a problem with deer in the garden.
I should make mention, the deer, here, are black tail----a relatively small animal.
H
I should make mention, the deer, here, are black tail----a relatively small animal.
H
Wise people talk because they have something to say. Fools talk because they have to say something.
Re: OT: Building in isolated location
Harold is right, when we lived ion Issaquah we had a 6' fence around the back yard and the only time the deer got in the back yard was when the the wind blew the fence down or when we left the side gate open for their free passage. We loved to take pics of them. Some would even bed down in the more secluded areas. That is the thing we most miss here in Caldwell.
- seal killer
- Posts: 4696
- Joined: Sat Aug 18, 2007 10:58 pm
- Location: Ozark Mountains
Re: OT: Building in isolated location
All--
A tour of the home site. I began on the lower level, next to the break in the ridge above the cliff. I videod this twice, the first time using the GoPro's "Super Wide" setting and the second time using the "Linear" setting, which is something of an approximation of what you and I see with the old Mark I devices.
Only the Linear setting didn't record because I didn't push the button or I didn't push it hard enough or I pushed the wrong button or . . .
Anyway, the only version I have to post is the Super Wide. So, here it is.
https://youtu.be/3riu2yw56dg
As a bonus, here is the absolute up to date latest on the garage and shop . . .
--Bill
A tour of the home site. I began on the lower level, next to the break in the ridge above the cliff. I videod this twice, the first time using the GoPro's "Super Wide" setting and the second time using the "Linear" setting, which is something of an approximation of what you and I see with the old Mark I devices.
Only the Linear setting didn't record because I didn't push the button or I didn't push it hard enough or I pushed the wrong button or . . .
Anyway, the only version I have to post is the Super Wide. So, here it is.
https://youtu.be/3riu2yw56dg
As a bonus, here is the absolute up to date latest on the garage and shop . . .
--Bill
You are what you write.
Re: OT: Building in isolated location
Wow Bill, that is going to be nice when completed. That is a dream home for sure.
Live for the moment!
Prepare for tomorrow!
Forgive the past!
Prepare for tomorrow!
Forgive the past!
- seal killer
- Posts: 4696
- Joined: Sat Aug 18, 2007 10:58 pm
- Location: Ozark Mountains
Re: OT: Building in isolated location
All--
I need a couple of retaining walls. I decided to use those large concrete blocks poured when concrete trucks do their cleanouts back at the plant. They are often rough and ugly. To overcome that, I will face them with natural stone or stucco them after smoothing the surface out with mortar.
Here is a partial wall created from eight of the 2'x2'x4', 2,400lb. blocks. (I plan to use some larger 2'x2'x6', 3,000lb.+ blocks in another wall.) I used my Komatsu to pick them up with a chain and my wife guided them into position. This partial wall is full height (2 blocks; 4 feet), but it will not be finished until spring due to no concrete being ordered during the winter months, thus no truck cleanouts.
A face on shot of the wall (I "touched" the moisture barrier with a tooth on the bucket . . . gotta fix that.) . . .
And here is a shot of the east side of the house showing the semi-completed shop/garage. My east shop wall is the unfinished area. It should be complete today. This photo shows the drive through bay. (The retaining wall shown above is to the left in this picture.)
The west side shot of the garage is shown in one of my previous posts.
The day after Thanksgiving, my wife and I are headed down to spend a week staining 8" white pine for the vaulted ceilings of the kitchen/dining/living room and master bedroom. I think the total to stain is 1720 square feet. Thankfully, we have a complete guest bath up and running and another toilet available in the upper level master bath.
Speaking of Thanksgiving, we have a lot to be thankful for. (Mechanicalmagic would beat me up at this point for purposefully ending the previous sentence with a preposition. I'm just sayin' . . .) Specifically, to this forum, I am thankful for all you have taught me. I imagine my feeling of gratitude is shared by many finding satisfaction in learning (in my case, very imperfectly) some of the skills of this discipline.
--Bill
I need a couple of retaining walls. I decided to use those large concrete blocks poured when concrete trucks do their cleanouts back at the plant. They are often rough and ugly. To overcome that, I will face them with natural stone or stucco them after smoothing the surface out with mortar.
Here is a partial wall created from eight of the 2'x2'x4', 2,400lb. blocks. (I plan to use some larger 2'x2'x6', 3,000lb.+ blocks in another wall.) I used my Komatsu to pick them up with a chain and my wife guided them into position. This partial wall is full height (2 blocks; 4 feet), but it will not be finished until spring due to no concrete being ordered during the winter months, thus no truck cleanouts.
A face on shot of the wall (I "touched" the moisture barrier with a tooth on the bucket . . . gotta fix that.) . . .
And here is a shot of the east side of the house showing the semi-completed shop/garage. My east shop wall is the unfinished area. It should be complete today. This photo shows the drive through bay. (The retaining wall shown above is to the left in this picture.)
The west side shot of the garage is shown in one of my previous posts.
The day after Thanksgiving, my wife and I are headed down to spend a week staining 8" white pine for the vaulted ceilings of the kitchen/dining/living room and master bedroom. I think the total to stain is 1720 square feet. Thankfully, we have a complete guest bath up and running and another toilet available in the upper level master bath.
Speaking of Thanksgiving, we have a lot to be thankful for. (Mechanicalmagic would beat me up at this point for purposefully ending the previous sentence with a preposition. I'm just sayin' . . .) Specifically, to this forum, I am thankful for all you have taught me. I imagine my feeling of gratitude is shared by many finding satisfaction in learning (in my case, very imperfectly) some of the skills of this discipline.
--Bill
You are what you write.
- neanderman
- Posts: 896
- Joined: Mon Jan 09, 2012 7:15 pm
- Location: Cincinnati, Ohio, USA
Re: OT: Building in isolated location
Happy Thanksgiving, Bill ( and everyone else reading.)
Ed
LeBlond Dual Drive, 15x30
US-Burke Millrite MVI
Atlas 618
Files, snips and cold chisels
Proud denizen of the former "Machine Tool Capitol of the World"
LeBlond Dual Drive, 15x30
US-Burke Millrite MVI
Atlas 618
Files, snips and cold chisels
Proud denizen of the former "Machine Tool Capitol of the World"
- warmstrong1955
- Posts: 3568
- Joined: Thu Mar 18, 2010 2:05 pm
- Location: Northern Nevada
Re: OT: Building in isolated location
WOW Bill!
I wouldn't know what to do with all that space!
(OK....yes I would!)
Nice! And, A Happy Thanksgiving to you and everyone!
Other Bill
I wouldn't know what to do with all that space!
(OK....yes I would!)
Nice! And, A Happy Thanksgiving to you and everyone!
Other Bill
Today's solutions are tomorrow's problems.
- seal killer
- Posts: 4696
- Joined: Sat Aug 18, 2007 10:58 pm
- Location: Ozark Mountains
Re: OT: Building in isolated location
All--
Watch this super exciting video of my wife and I sanding and staining a bunch of boards!!!
Actually, there may be something of interest in this video, so watch it . . .
https://youtu.be/PxqMdihwqaY
--Bill
Watch this super exciting video of my wife and I sanding and staining a bunch of boards!!!
Actually, there may be something of interest in this video, so watch it . . .
https://youtu.be/PxqMdihwqaY
--Bill
You are what you write.