Southbend heavy 10

Topics include, Machine Tools & Tooling, Precision Measuring, Materials and their Properties, Electrical discussions related to machine tools, setups, fixtures and jigs and other general discussion related to amateur machining.

Moderators: Harold_V, websterz, GlennW

Randall Va
Posts: 101
Joined: Sat Feb 20, 2010 9:42 pm

Southbend heavy 10

Post by Randall Va » Tue Nov 29, 2016 9:19 pm

looking for a gears for my southbend heavy 10 one 5 1/8 dia,80 tooth 3/4 bore,one 3 1/8 56 tooth 5/8 bore,I have been looking on ebay and other places with no luck,Thanks
www.chaski.com

User avatar
10KPete
Posts: 395
Joined: Wed Sep 30, 2015 5:29 pm
Location: Nordland, WA, USA

Re: Southbend heavy 10

Post by 10KPete » Wed Nov 30, 2016 4:07 am

Just tryin'

spro
Posts: 7871
Joined: Mon Feb 20, 2006 11:04 pm
Location: mid atlantic

Re: Southbend heavy 10

Post by spro » Wed Nov 30, 2016 9:00 am

Time was, you just don't join P.M. to find parts or sell machines. just sayin'

User avatar
SteveM
Posts: 7055
Joined: Mon Jun 27, 2005 6:18 pm
Location: Connecticut

Re: Southbend heavy 10

Post by SteveM » Wed Nov 30, 2016 12:52 pm

spro wrote:Time was, you just don't join P.M. to find parts or sell machines. just sayin'
PM will tolerate people who join to buy stuff. It's the people who are only there to sell that get banned.

Steve

User avatar
10KPete
Posts: 395
Joined: Wed Sep 30, 2015 5:29 pm
Location: Nordland, WA, USA

Re: Southbend heavy 10

Post by 10KPete » Wed Nov 30, 2016 3:04 pm

Stay in the South Bend group, talk about South Bend stuff, and you're fine. Just don't talk about import stuff!! :shock:

The SB parts guys pay fairly close attention to enquiries make there....

Pete
Just tryin'

User avatar
SteveM
Posts: 7055
Joined: Mon Jun 27, 2005 6:18 pm
Location: Connecticut

Re: Southbend heavy 10

Post by SteveM » Wed Nov 30, 2016 4:47 pm

10KPete wrote:Stay in the South Bend group, talk about South Bend stuff, and you're fine. Just don't talk about import stuff!! :shock:
Even worse than imports; don't talk about Atlas!

Steve

User avatar
Nelson
Posts: 85
Joined: Wed Nov 14, 2012 10:33 am
Location: New York

Re: Southbend heavy 10

Post by Nelson » Wed Nov 30, 2016 7:54 pm

You're welcome to try here also:

http://www.hobby-machinist.com/forums/s ... -works.85/

I don't know who follows it, but someone may be able to help you out. And you can mention Atlas! :-)
Nels
Founder, Hobby-Machinist.com
SB 10L Lathe in pieces, Burke #4, Van Norman #12

earlgo
Posts: 1491
Joined: Sat Jan 29, 2011 11:38 am
Location: NE Ohio

Re: Southbend heavy 10

Post by earlgo » Thu Dec 01, 2016 9:47 am

spro, have you tried Boston Gear? They have change gears for the Craftsman/Atlas and perhaps something that would fit the SB. You'd have to know the pitch to look it up, though.
Boston gear catalog 12.pdf
(92.29 KiB) Downloaded 33 times
--earlgo
Before you do anything, you must do something else first. - Washington's principle.

shootnride
Posts: 231
Joined: Tue Jun 05, 2012 12:31 am
Location: Sacramento, Ca.

Re: Southbend heavy 10

Post by shootnride » Thu Dec 01, 2016 10:02 am

You may want to try this place. Their website says they have a lot of SB parts.

www.lostcreekmachine.com

Ted
Some people raise the IQ of the room when they enter.........others when they leave.

Randall Va
Posts: 101
Joined: Sat Feb 20, 2010 9:42 pm

Re: Southbend heavy 10

Post by Randall Va » Thu Dec 01, 2016 4:52 pm

Thanks fellows I found them
www.chaski.com

spro
Posts: 7871
Joined: Mon Feb 20, 2006 11:04 pm
Location: mid atlantic

Re: Southbend heavy 10

Post by spro » Thu Dec 01, 2016 7:57 pm

Hi Randall. I glad you found your gears. Because of this thread, I checked out Lost Creek again. They have a lot of good stuff there. Lathes are reasonable. The Sheldon 13" and others are on sale now and even a 1942 Monarch 10EE.

Randall Va
Posts: 101
Joined: Sat Feb 20, 2010 9:42 pm

Re: Southbend heavy 10

Post by Randall Va » Thu Dec 01, 2016 8:17 pm

That Monarch would be nice!!
www.chaski.com

Post Reply