Topics include, Machine Tools & Tooling, Precision Measuring, Materials and their Properties, Electrical discussions related to machine tools, setups, fixtures and jigs and other general discussion related to amateur machining.
Moderators: GlennW , Harold_V
warmstrong1955
Posts: 3568 Joined: Thu Mar 18, 2010 2:05 pmLocation: Northern Nevada
Post
by warmstrong1955 Fri Feb 03, 2017 10:51 am
SteveHGraham wrote: BigDumbDinosaur wrote: Your link is to a website run by some ambulance chasers. Hardly objective.
Offended by ambulance chasers? Having trouble sleeping? You may have actionable damages! Call today for a free consultation!
Wonder how you have that line so well memorized....
Today's solutions are tomorrow's problems.
SteveHGraham
Posts: 7788 Joined: Sat Jan 17, 2009 7:55 pmLocation: Florida
Post
by SteveHGraham Fri Feb 03, 2017 10:59 am
It's called "watching cable TV for more than 15 minutes."
Every hard-fried egg began life sunny-side up.
warmstrong1955
Posts: 3568 Joined: Thu Mar 18, 2010 2:05 pmLocation: Northern Nevada
Post
by warmstrong1955 Fri Feb 03, 2017 11:13 am
SteveHGraham wrote: It's called "watching cable TV for more than 15 minutes."
Where else would you learn about how to change your life, with a 'My Pillow'?
Today's solutions are tomorrow's problems.
SteveHGraham
Posts: 7788 Joined: Sat Jan 17, 2009 7:55 pmLocation: Florida
Post
by SteveHGraham Fri Feb 03, 2017 12:01 pm
Only a problem if mom eats asbestos.
Every hard-fried egg began life sunny-side up.
warmstrong1955
Posts: 3568 Joined: Thu Mar 18, 2010 2:05 pmLocation: Northern Nevada
Post
by warmstrong1955 Fri Feb 03, 2017 12:05 pm
SteveHGraham wrote: Only a problem if mom eats asbestos.
That might be something I need, as I'm not much on cookin'.
I can burn water.
A little asbestos....might make stuff hard to burn!
Today's solutions are tomorrow's problems.
Mr Ron
Posts: 2126 Joined: Tue Dec 22, 2009 12:36 pmLocation: Vancleave, Mississippi
Post
by Mr Ron Fri Feb 03, 2017 12:46 pm
It is always good practice to wear a mask whenever ANY material that produces a fine dust is machined whether it be metal, plastic or wood. Smokers may also be more susceptible to dust/fume environments. Anything that gets into your lungs is a foreign substance and doesn't belong there.
Mr.Ron from South Mississippi
Steggy
Posts: 1984 Joined: Tue Jun 28, 2011 9:19 pmLocation: JB Pritzker’s Hellhole
Contact:
Post
by Steggy Fri Feb 03, 2017 3:10 pm
SteveHGraham wrote: BigDumbDinosaur wrote: Your link is to a website run by some ambulance chasers. Hardly objective.
Offended by ambulance chasers? Having trouble sleeping? You may have actionable damages! Call today for a free consultation!
I strained my pinkie finger typing this reply. Should be worth millions, right?
———————————————————————————————————————————————————————All you gotta do is play the right notes at the right time!
ctwo
Posts: 2996 Joined: Tue Mar 27, 2012 12:37 pmLocation: Silly Cone Valley
Post
by ctwo Fri Feb 03, 2017 4:06 pm
SteveHGraham wrote: BigDumbDinosaur wrote: Your link is to a website run by some ambulance chasers. Hardly objective.
Offended by ambulance chasers? Having trouble sleeping? You may have actionable damages! Call today for a free consultation!
I'm putting you on speed dial, Steve. That is, if you are not too busy collecting royalties these days...
Standards are so important that everyone must have their own...
