I needed to true up a chuck faceplate on a wood lathe, but there's no cross slide to use, and doing it on my lathe won't guarantee concentricity with the lathe spindle.
Was trying to think what I had that would move across the bed in a straight line and it hit on me to use the moving jaw of a Kurt vise.
I clamped the tool bit to the jaw, lined it all up and it did a pretty decent job.
Steve
Truing a wood lathe faceplate
Re: Truing a wood lathe faceplate
Very innovative!
--earlgo
--earlgo
Before you do anything, you must do something else first. - Washington's principle.