We just finished the squareness checker and tried it for the first time. If you are interested you can watch the video here https://www.youtube.com/watch?v=SqzPxB4aM0I
In the video we are grinding the nose radius with a spin fixture, using a v-block to grind 45 degree relief on 2 edges and using a boron stick and pop sickle stick to grind a corner radius.
Steve
Just finished the Squareness Checker
Re: Just finished the Squareness Checker
Thanks for the link and your videos. Perhaps I cannot say anything because I don't have a surface grinder as yours nor "Boron sticks" to alter the wheel surface. There are many tips along the way which are helpful and I enjoy.
Re: Just finished the Squareness Checker
Hi Spro,
Thanks for the comments.
Steve
Thanks for the comments.
Steve