Small Articulated Indicator Holder Feedback

Topics include, Machine Tools & Tooling, Precision Measuring, Materials and their Properties, Electrical discussions related to machine tools, setups, fixtures and jigs and other general discussion related to amateur machining.

Moderators: Harold_V, websterz, GlennW

Post Reply
User avatar
ctwo
Posts: 2557
Joined: Tue Mar 27, 2012 12:37 pm
Location: Silly Cone Valley

Small Articulated Indicator Holder Feedback

Post by ctwo » Thu Nov 30, 2017 6:40 am

I bought one of the knock-offs on eBay, the little red one. It works fine, except the person doing the final grinding made the bottom into an arc, so I had to mill off about 30 thou and grind it smooth again. The magnet seems OK, but being so small it's not really suitable for a full size dial indicator. It will be really good for my DTI's and 1" indicators when small is needed. I am considering adding a fine adjust to the base.
Standards are so important that everyone must have their own...
To measure is to know - Lord Kelvin
Disclaimer: I'm just a guy with a few machines...

Post Reply