Sajo uf 54 duo mill with vrf 52m overarm

Topics include, Machine Tools & Tooling, Precision Measuring, Materials and their Properties, Electrical discussions related to machine tools, setups, fixtures and jigs and other general discussion related to amateur machining.

Moderators: Harold_V, websterz, GlennW

Post Reply
rusty69
Posts: 10
Joined: Sun Jan 14, 2018 5:27 pm

Sajo uf 54 duo mill with vrf 52m overarm

Post by rusty69 » Mon Jan 15, 2018 3:21 am

New member. I bought the above (1966?)mill off of a government auction site. It came from Shoreline Community College. It has the table cross feed screw and nut, but the screw end may be damaged, and it is missing all the hardware, handwheels, dials, etc for the screw ends. I tried going thru the auction site to see if the parts are laying in a box somewhere, but didn't get a positive response. Does anyone have any of those parts, or have a similar machine they can take pictures of the table ends, so I can see what it is supposed to look like, and how it is put together? It seems like info on these machines is hard to come by here in the States.

Sent from my SM-G900V using Tapatalk


Post Reply