Speaking of Shop Realities ...

Topics include, Machine Tools & Tooling, Precision Measuring, Materials and their Properties, Electrical discussions related to machine tools, setups, fixtures and jigs and other general discussion related to amateur machining.

Moderators: Harold_V, websterz, GlennW

User avatar
BigDumbDinosaur
Posts: 838
Joined: Tue Jun 28, 2011 9:19 pm
Location: Midwestern United States

Re: Speaking of Shop Realities ...

Post by BigDumbDinosaur » Thu Nov 08, 2018 1:24 am

Why is it when you are working on a car and you drop a bolt it always rolls under the hottest part of the exhaust system?
—————————————————————————————————
I'm an old guy. What's your excuse? ☻

User avatar
liveaboard
Posts: 890
Joined: Sun Dec 08, 2013 1:40 pm
Location: southern Portugal
Contact:

Re: Speaking of Shop Realities ...

Post by liveaboard » Thu Nov 08, 2018 6:42 am

I dropped a bolt down between the ex manifold and the head and just replaced it with another.
The following day, the starter motor started running by itself.
The dropped bolt wiggled itself right over the starter motor cable lugs.

User avatar
Dave_C
Posts: 960
Joined: Mon Apr 21, 2008 10:34 am
Location: Springfield. MO.

Re: Speaking of Shop Realities ...

Post by Dave_C » Thu Nov 08, 2018 9:18 am

Why is it that if you have any opening in the floor, a dropped object will most always roll toward it? Or into it?

Dave C.
I learn something new every day! Problem is I forget two.

User avatar
Rick
Posts: 444
Joined: Sat Jan 04, 2003 8:34 pm
Location: Stone Mountain, Ga.

Re: Speaking of Shop Realities ...

Post by Rick » Thu Nov 08, 2018 11:12 am

Typical day in the shop
Attachments
23843516_1465896173517814_3384720234301534987_n.jpg
Rick

“We make a living by what we get, but we make a life by what we give." Sir Winston Leonard Spencer Churchill (1874-1965)
"Peace is that brief glorious moment in history when everybody stands around reloading". Unknown
Murphy's Law: " If it can go wrong it will"
O-Tool's Corollary: "Murphy was entirely too optimistic"

RSG
Posts: 1089
Joined: Fri Feb 04, 2011 9:59 am
Location: Ontario, Canada

Re: Speaking of Shop Realities ...

Post by RSG » Thu Nov 08, 2018 12:30 pm

LOL@Rick! I did just that last night while mounting a DRO scale on my mill......
Vision is not seeing things as they are, but as they will be.

JackF
Posts: 1559
Joined: Mon Jan 26, 2009 3:56 pm
Location: Caldwell, Idaho

Re: Speaking of Shop Realities ...

Post by JackF » Thu Nov 08, 2018 2:00 pm

If it can, it will,...............and it did. :roll: :wink: :x



Jack.

earlgo
Posts: 1451
Joined: Sat Jan 29, 2011 11:38 am
Location: NE Ohio

Re: Speaking of Shop Realities ...

Post by earlgo » Fri Nov 09, 2018 9:49 am

Somewhere in my shop is about 5# of dropped hardware. When my children clean out the garage/shop they will wonder why I stored all that stuff under and behind things.
My favorite stupid thing is leaving the micrometers in a bolt box and then spending days off and on looking for it. Fortunately I needed a similar bolt just before I spent the $$$ for a new set of mics.
--earlgo
Before you do anything, you must do something else first. - Washington's principle.

Inspector
Posts: 620
Joined: Mon Feb 23, 2009 4:25 am
Location: Saskatoon, SK, Canada

Re: Speaking of Shop Realities ...

Post by Inspector » Fri Nov 09, 2018 11:08 am

How come when you throw something out because you'll never use it,,,,,,you need it.

John Hasler
Posts: 1275
Joined: Tue Dec 06, 2016 4:05 pm
Location: Elmwood, Wisconsin

Re: Speaking of Shop Realities ...

Post by John Hasler » Fri Nov 09, 2018 11:52 am

earlgo writes:
> My favorite stupid thing is leaving the micrometers in a bolt box and then spending days off and on looking for it.

I don't know how many times I've put myself in a state of frustration by putting something away in the wrong place. When I don't find it where it belongs my first reaction, of course, is "I left it out again. Now, where did use it last? Not there. Ok. Start searching." Eventually I give up and start on something else. I open the drawer with the milling clamps in it. There's my voltmeter.

Glenn Brooks
Posts: 1801
Joined: Mon Nov 10, 2014 1:39 pm
Location: Woodinville, Washington

Re: Speaking of Shop Realities ...

Post by Glenn Brooks » Sun Nov 11, 2018 10:38 pm

My reality is why does installing one additional electrical circuit in my cleaned up shop end up looking like this?
Attachments
C1044E8C-E9A0-4072-897A-72BBE6835F7E.jpeg
E0C53D36-5737-4CF9-ACF1-08C830A7CE20.jpeg
Moderator - Grand Scale Forum

Motive power : 1902 A.S.Campbell 4-4-0 American - 12 5/8" gauge, 1955 Ottaway 4-4-0 American 12" gauge

Ahaha, Retirement: the good life - drifting endlessly on a Sea of projects....

TRX
Posts: 146
Joined: Wed Aug 20, 2008 7:30 pm
Location: Central Arkansas

Re: Speaking of Shop Realities ...

Post by TRX » Tue Jan 01, 2019 3:27 pm

When I need a 12" piece of 1" round bar, and the longest pieces I have on hand are 11-1/4, 11-1/2, and 11-3/4"...

It would be funny if similar things didn't happen so often. So a lot of projects start with "weld up two small pieces into a big-enough piece..."

User avatar
10KPete
Posts: 393
Joined: Wed Sep 30, 2015 5:29 pm
Location: Nordland, WA, USA

Re: Speaking of Shop Realities ...

Post by 10KPete » Tue Jan 01, 2019 4:01 pm

Just this morning I couldn't find my shingle hatchet. I used it a few weeks ago... it's not in the 'roofing' bucket... looked all over the shop... nowhere.

I found it while looking for something else. It was in a bucket... the wrong one!! Now I have to fix the shop roof before it rains tomorrow.

Every day it's something..

Pete
Just tryin'

Post Reply