Bandsaw guard adjustment screw

Topics include, Machine Tools & Tooling, Precision Measuring, Materials and their Properties, Electrical discussions related to machine tools, setups, fixtures and jigs and other general discussion related to amateur machining.

Moderators: Harold_V, websterz, GlennW

Post Reply
User avatar
Posts: 7243
Joined: Mon Jun 27, 2005 6:18 pm
Location: Connecticut

Bandsaw guard adjustment screw

Post by SteveM » Tue Jan 15, 2019 10:24 pm

The screw that clamps the upper blade guide unit on my bandsaw has an interesting problem: it's recessed in so far you might grab the identical screw that holds the blade guide itself.

So I made a 3" extension with a press fit bolt in one end and the original screw threads into the other end, where I will probably apply some locktite.

Now I'm less likely to throw off my blade guide adjustment by grabbing the wrong one.


Post Reply