GE 44 tonner

Topics include, Machine Tools & Tooling, Precision Measuring, Materials and their Properties, Electrical discussions related to machine tools, setups, fixtures and jigs and other general discussion related to amateur machining.

Moderators: Harold_V, websterz, GlennW

Posts: 316
Joined: Fri May 28, 2010 3:40 pm
Location: Winchendon Mass. USA

Re: GE 44 tonner

Post by duckman903 » Tue Mar 12, 2019 5:03 pm

As I implied 2" scale 7 1/4" gauge

Posts: 150
Joined: Tue Aug 12, 2008 9:42 pm
Location: Prince Rupert, British Columbia

Re: GE 44 tonner

Post by prlawiii » Wed Mar 13, 2019 1:21 am

As I recall from when I had HO trains as a kid, HO is 3.5 mm equals one foot. That is .1378 inches. If you are trying to build in the scale where 2.5 inches equals one foot, you would multiply the HO dimensions by 2.5/.1378, which is equal to 18.14 times.

Just starting an Allen Mogul
renewing a Marie Estelle

Post Reply