Needing a gear

Topics include, Machine Tools & Tooling, Precision Measuring, Materials and their Properties, Electrical discussions related to machine tools, setups, fixtures and jigs and other general discussion related to amateur machining.

Moderators: Harold_V, websterz, GlennW

User avatar
Posts: 62
Joined: Sat Sep 13, 2003 2:47 pm
Location: El Paso, TX

Re: Needing a gear

Post by TimTheGrim » Fri Jul 12, 2019 9:55 pm

Another possible option... ... C29-Y24012

They take PayPal. I’ve purchased from them before and been happy.
Illigitimi non Carborundum
'96 Birmingham mill, Enco 13x40 GH and Craftsman 6x18 lathes, Reid 2C surface grinder. Duro Bandsaw and lots of tooling from 30+ years in the trade. Now I boil oil.

Posts: 607
Joined: Sat Mar 28, 2009 3:54 pm
Location: Wichita, KS

Re: Needing a gear

Post by whateg0 » Sat Jul 13, 2019 6:53 pm

I must be really bad at searching. I spent a little time searching there and didn't see that. I think I was too focused on searching for one thing or something. I dunno. I already ordered from McMaster. I'll get a foot of gear stock and can turn the ends down to fit. I need to look up the spacing now since the hole is pretty wallered out. You can really see how much it moved and how much the diameter changed.

Post Reply