KO Lee B942 Sensitive work head

Topics include, Machine Tools & Tooling, Precision Measuring, Materials and their Properties, Electrical discussions related to machine tools, setups, fixtures and jigs and other general discussion related to amateur machining.

Moderators: GlennW, Harold_V

Post Reply
skipd1
Posts: 22
Joined: Wed Jul 11, 2012 7:04 pm

KO Lee B942 Sensitive work head

Post by skipd1 »

Has any one taken apart a KO Lee B942 Sensitive work head. It came with a 5C collet holder and draw bar, or maybe that's the way it comes originally. Anyway I am wondering if the 5C collet holder can be removed from the work head, leaving the original B&S #11 Taper. Or are the inseparable and a unified part of the spindle. I was thinking of using a hydraulic press to push it out, but I would appreciate some advise as to how to proceed. I am hoping the B&S #11 with the 5C could also be used in a motorized work head and switched between them? Or maybe this is a real dumb idea. :roll:
Top
Post Reply

Return to “General Discussion”