Which end mill to use

Topics include, Machine Tools & Tooling, Precision Measuring, Materials and their Properties, Electrical discussions related to machine tools, setups, fixtures and jigs and other general discussion related to amateur machining.

Moderators: Harold_V, websterz, GlennW

johnfreese
Posts: 181
Joined: Thu Jan 21, 2016 2:10 am

Re: Which end mill to use

Post by johnfreese » Thu Sep 05, 2019 6:08 pm

Be careful what coating you order. Some coatings will cause ali to adhere to the cutter. I use uncoated carbide with polished flutes.

Mr Ron
Posts: 1853
Joined: Tue Dec 22, 2009 12:36 pm
Location: Vancleave, Mississippi

Re: Which end mill to use

Post by Mr Ron » Fri Sep 06, 2019 4:23 pm

johnfreese wrote:
Thu Sep 05, 2019 6:08 pm
Be careful what coating you order. Some coatings will cause ali to adhere to the cutter. I use uncoated carbide with polished flutes.
When I ordered the end mill from McMaster Carr, it was stated in the catalog that it was for aluminum, brass, bronze and other non ferrous metals.
Mr.Ron from South Mississippi

Post Reply