Parting tool holder
Re: Parting tool holder
The only place I know of is here in Canada at Busy Bee Tools, that's where I got mine. They have a few sizes to choose from and I think they do mail order cross border.
https://www.busybeetools.com/products/i ... b3336.html
https://www.busybeetools.com/products/i ... b3336.html
Vision is not seeing things as they are, but as they will be.
Re: Parting tool holder
Grizzly and Busy Bee are related by blood so lots of what Busy Bee carry are also sold by Grizzly. They seem to have similar parting tools.
https://www.grizzly.com/products/Grizzl ... ade/T10376
https://www.grizzly.com/products/Grizzl ... ert/T10012
Pete
https://www.grizzly.com/products/Grizzl ... ade/T10376
https://www.grizzly.com/products/Grizzl ... ert/T10012
Pete
Re: Parting tool holder
They are really short on specifications. I can't even tell of it's a GTN2 or 3.Inspector wrote: ↑Wed Feb 19, 2020 7:09 pm Grizzly and Busy Bee are related by blood so lots of what Busy Bee carry are also sold by Grizzly. They seem to have similar parting tools.
https://www.grizzly.com/products/Grizzl ... ade/T10376
https://www.grizzly.com/products/Grizzl ... ert/T10012
Pete
Steve
Re: Parting tool holder
That's good that Grizzly carries them. Steve, perhaps an email to Glanze directly will answer which insert style it is.
Vision is not seeing things as they are, but as they will be.
Re: Parting tool holder
According to the first page, they are GTN3. DaveSteveM wrote: ↑Wed Feb 19, 2020 11:01 pmThey are really short on specifications. I can't even tell of it's a GTN2 or 3.Inspector wrote: ↑Wed Feb 19, 2020 7:09 pm Grizzly and Busy Bee are related by blood so lots of what Busy Bee carry are also sold by Grizzly. They seem to have similar parting tools.
https://www.grizzly.com/products/Grizzl ... ade/T10376
https://www.grizzly.com/products/Grizzl ... ert/T10012
Pete
Steve
-
- Posts: 2366
- Joined: Tue Jan 20, 2009 9:33 pm
- Location: Phoenix ,AZ
Re: Parting tool holder
Blade has to be thinner than the insert for clearance. So GTN 3 should be 3MM wide right?
www.chaski.com
Re: Parting tool holder
It says the insert is 3/32", not the blade.John Evans wrote: ↑Thu Feb 20, 2020 5:39 pm Blade has to be thinner than the insert for clearance. So GTN 3 should be 3MM wide right?
There actually are GTN2.4 inserts.
Steve
Re: Parting tool holder
I'll be in Springfield week after next if there's any tools you want me to check out.
Re: Parting tool holder
An ad popped up today for msc selling gtn2.4 inserts. Google is really smart.
https://www.mscdirect.com/browse/tnpla/08690281?
Dave
https://www.mscdirect.com/browse/tnpla/08690281?
Dave